Le Lézard
Classified in: Mining industry
Subject: ANALYSTS' COMMENTS

Cartier Cuts 3.2 g/t Au over 15.0 m at Chimo Mine


Highlights of the press release (FIGURE 1):


VAL-D'OR, Quebec, July 13, 2023 (GLOBE NEWSWIRE) -- Cartier Resources Inc. (TSX-V: ECR) ("Cartier") announces drill hole results from the West Nordeau and West Chimo Mine sectors. Drilling in the West Nordeau sector aims to increase resources in a future estimate (MRE5*), while drilling in the West Chimo Mine sector aims to discover new gold zones in a little-explored sector, located proximal to the underground infrastructures (FIGURE 1). The Chimo Mine property, which is 100% owned by Cartier, is located 45 km east of the Val-d'Or mining camp.

"Although drilling was suspended on June 2 due to forest fires in Quebec, numerous assay results are still pending from the laboratory. This suspension of drilling coincides with the achievement of the objectives of the first phase of 25,000 m, located between 100 m and 800 m depths. The results will be used to carry out the next phase located between 800 m and 1.6 km depths," commented Philippe Cloutier, President and CEO.

West Nordeau Sector (FIGURE 1):

Drilling intersected new values of 3.2 g/t Au over 15.0 m including 6.0 g/t Au over 3.0 m, as well as 2.3 g/t Au over 7.0 m including 6.9 g/t Au over 1.0 m. These new results, located between 450 m and 575 m depth, increase the depth extension of the 5NE2 Gold Zone by 175 m.

West Chimo Mine Sector (FIGURE 1):

The new values of 2.8 g/t Au over 4.0 m including 9.6 g/t Au over 1.0 m are located at 800 m depth. These values increase the depth extension of the 6N1W Gold Zone by 350 m, the summit portion of which is located only 20 m from the existing underground infrastructures.

The West Chimo Mine Sector is just beginning to be explored and two new gold zones have already been discovered there in the winter of 2023 (5BW and 6N1W). Drilling of one of these gold zones (6N1W) already shows gold values to a depth of 800 m. With additional drilling, this new zone near existing infrastructures would be part of the next resource estimate (MRE5*).

Table: Detailed information of the new results

Drill HoleCoordinates
UTM (m)
Azimuth (°)
/Plunge (°)
From
(m)
To
(m)
Au
(g/t)
Length
(m)
Gold
Zone
Gold
Structure
West Nordeau Sector: 5NE2 Gold Zone
CH23-91333527/5319849/351
180/-74
493.0508.03.215.05NE2
5N
Including505.0508.06.03.0
CH23-89333527/5319849/351
168/-69
473.0480.02.37.0
Including473.0474.06.91.0
CH23-86333527/5319849/351190/-56391.0395.02.54.0
West Chimo Mine Sector: 6N1 Gold Structure
CH23-66331534/5320441/341186/-61624.0624.825.70.8-6N1
CH23-67331538/5320124/341
195/-65
282.0284.06.02.0-
Including283.4284.011.70.6
CH23-87B331470/5320227/-267
152/-59
897.0901.02.84.06N1W
Including897.0898.09.61.0

The lengths of the mineralized intersections are expressed as lengths measured along the drill core.
The estimated true thickness of the mineralized intersections represents approximately 75 to 95% of the measured length.

Reminder of the highlights of the Chimo Mine Project:

* NI 43-101 Technical Report and Preliminary Economic Assessment for Chimo Mine and West Nordeau Gold Deposits, Chimo Mine and East Cadillac Properties, Quebec, Canada, Marc R. Beauvais, P.Eng., of InnovExplo Inc., Mr. Florent Baril of Bumigeme and Mr. Eric Sellars, P.Eng. of Responsible Mining Solutions, May, 29th, 2023.

** NI 43-101 Mineral Resources Estimate for Chimo Mine and West Nordeau Gold Deposits, Québec, Canada, Vincent Nadeau-Benoit, P.Geo., Alain Carrier, P.Geo., M.Sc. and Marc R. Beauvais, P.Eng., InnovExplo Inc., August 22th, 2022.

About Cartier Resources Inc.

Cartier Resources Inc. was founded in 2006 and is an advanced gold project exploration company based in Val-d'Or. The company's projects are all located in Quebec, which has consistently ranked as one of the world's best mining jurisdictions. Cartier is advancing the development of its flagship Chimo Mine Project. The Company has a cash position exceeding $2.5 M and a significant corporate and institutional endorsement, including Agnico Eagle Mines, O3 Mining and Quebec investment funds.

Qualified Persons

The scientific and technical information on the Company and the Chimo Mine Project in this news release was prepared and reviewed by Mr. Gaétan Lavallière, P. Geo., Ph. D, Cartier's Vice- President and Mr. Ronan Déroff, P. Geo, M. Sc., Cartier's Senior Geologist, Project Manager and Geomatician, both qualified persons as defined in NI 43-101. Mr. Lavallière approved the information contained in this press release.

Quality Assurance / Quality Control

Cartier inserts in the batches of samples sent to the laboratory, 5% of the number of samples in the form of certified standards and another 5% in the form of sterile samples to ensure quality control. The samples are analyzed at the Techni-Lab laboratory (Actlabs), located in Ste-Germaine-Boulé, Quebec, Canada. Samples of 3 to 5 kg are crushed by the laboratory up to 90% passing a mesh of 10 mesh (2.00 mm) then 500 g of sample is pulverized up to 90% passing a mesh of 200 mesh (0.07mm). The 50 g pulps are analyzed by fire assay and are read by atomic absorption. Samples with results ? 1.0 g/t and < 10.0 g/t are re-assayed by fire assay and read by atomic absorption. Results greater than or equal to 10.0 g/t Au are analyzed by fire assay with gravimetric reading. For samples containing visible gold, 500 g of rock are analyzed by the "Metallic Sieve" method.

MRE5*: Fifth "Mineral Resource Estimate" of the Chimo Mine Project.

For more information, contact:
Philippe Cloutier, P. Geo.
President and CEO
Telephone: 819-856-0512
[email protected]
www.ressourcescartier.com

Neither the TSX Venture Exchange nor its regulatory services provider accepts responsibility for the adequacy or accuracy of this press release.

A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/b21ad4a9-cea9-4fdf-be15-be98229b5300



These press releases may also interest you

at 11:00
AngleLock will launch its newest product, Arrow-1, at Automate 2024 in Chicago May 6-9. The 7th Axis Linear Shaft Motor Gantry is the first of its kind, and it's designed for high speed, reliability, and precision motion....

at 04:57
Monport, an industry frontrunner in laser engraving and cutting technology, introduces the groundbreaking Mobility Protrude series. This compact and potent CO2 laser engravers redefine efficiency and performance, all while maintaining an accessible...

27 avr 2024
Shanghai International Automotive Manufacturing Technology & Material Show (AMTS) first held in 2004, is the world's largest automotive engineering technology trade fair. Serving as a display platform for technology and products for 19 years, it is...

26 avr 2024
West Red Lake Gold Mines Ltd. ("West Red Lake Gold" or "WRLG" or the "Company") announces an updated Mineral Resource Estimate ("MRE") effective as of March 1, 2024, on its 100% owned Rowan Mine Deposit, located in the Red Lake Gold District of...

26 avr 2024
Osisko Development Corp. ("Osisko Development" or the "Company") announces the filing of a technical report (the "Technical Report") for the updated mineral resource estimate ("MRE") on its 100%-owned underground Trixie deposit (the "2024 Trixie...

26 avr 2024
Kootenay Resources Inc. ("Kootenay" or the "Company") announces that it has closed its previously announced non-brokered private placement offering (the "Offering") for aggregate gross proceeds of $473,094.95. The Company continues to work towards...



News published on and distributed by: