Classified in: Mining industry
Subject: ANALYSTS' COMMENTS

Troilus Continues to Expand Zone X22, Drills High Grades of 103.81 g/t AuEq Over 1m, 14.68 g/t AuEq Over 7m, 3.10 g/t AuEq Over 17m and 3.29 g/t AuEq Over 11m

MONTREAL, July 11, 2023 (GLOBE NEWSWIRE) -- Troilus Gold Corp. ("Troilus" or the "Company", TSX: TLG; OTCQX: CHXMF) reports additional assay results from Zone X22 at the gold-copper Troilus Project, located in northcentral Quebec, Canada.

These results further demonstrate strong continuity between previously drilled holes and continue to highlight the high-grade trends of this zone (see plan view in Figure 1 and sections in Figures 2 and 3).

The reported results form part of a definition drill program targeting the high-grade NE-SW deformation corridor that characterizes the X22 Zone. An additional ~4,000 metres focused on infill drilling are planned in order to meet the Indicated resource category spacing requirement.

All results reported lie entirely outside of the PEA pit shells, excluding hole X22-23-026, and are intended to be included in the upcoming mineral resource estimate and Feasibility Study.

Zone X22 Intercept Highlights:

Hole X22-23-042 intersected a high-grade interval of 103.81 g/t AuEq over 1m, as well as 1.09 g/t AuEq over 45m within a broader intersection of 0.83 g/t AuEq over 82m, extending mineralization down-dip by 100m with hole X22-23-069, which returned 0.73 g/t AuEq over 55m, including 5.35 AuEq over 1m (see Figure 3). Mineralization remains open to expansion at depth.
Hole X22-23-067 intersected 14.68 g/t AuEq over 7m, including 133.12 g/t AuEq over 0.7m
Hole X22-23-066 intersected 3.29 g/t AuEq over 11m, including 24.56 g/t AuEq over 1m and 3.10 g/t AuEq over 17m, including 7.26 g/t AuEq over 3m extending mineralization 50m down-dip from previously reported hole 87-22-446 (see Figure 2).
Hole X22-23-044 returned 5.03 g/t AuEq over 3m, including 10.17 g/t AuEq over 1m extending mineralization 50m down-dip of hole X22-23-066 and remains open to expansion at depth (see Figure 2).
Hole X22-23-057 drilled 2.75 g/t AuEq over 2.4m at surface and 1.38 g/t AuEq over 12m, including 4.94 g/t AuEq over 1m confirming mineral continuity 100m down-dip from previously reported hole 87-22-410 and 50m up-dip from previously hole X22-23-023 (see Figure 2).

Justin Reid, CEO of Troilus Gold, commented, "Drilling in Zone X22 continues to impress us, returning some of the highest grades and most continuous intercepts in Troilus' history. We strongly believe that our drilling efforts at X22 will optimize an already strong project, with near-surface high grades that will enhance the mine's strip ratio and positively impact the mine sequencing. Significant recent rainfall in Quebec has provided some relief to the forest fire situation in the Eeyou-Istchee James Bay region and operations at our site are slowly re-starting since receiving government approval to access our camp. We expect to ramp up and resume drilling and exploration activities in the coming week as we closely monitor the situation to ensure the safety of our staff and local communities."

The northeastern most region of X22 is showcasing strong grades and mineral continuity near surface. Wide intervals of mineralization such as 0.83 g/t AuEq of 82m from hole X22-23-042 are characterized by pervasive biotite alteration with disseminated sulfides, as well as sericitized shear zones and felsic porphyry dykes. High-grade intercepts such as 103.81 g/t AuEq from X22-23-042 are characterized by more discrete structures containing semi-massive pyrrhotite and chalcopyrite. The strategic execution of the X22 drill program has rapidly expanded and defined the mineralized trend, which now extends ~1 kilometre and is expected to have a positive impact on the economics in the upcoming Feasibility Study, which remains on schedule for targeted completion prior to the end of the 2023 calendar year.

Figure 1: Plan View Map of Zone X22 Showing Current and Previously Reported Drilling
https://www.globenewswire.com/NewsRoom/AttachmentNg/5028dd02-d483-4e6b-bc3a-b23154ec9c24

Figure 2: Section 13,275N (A-A' Figure 1) Showing New Results for Holes X22-23-044, X22-23-066, and X22-23-057
https://www.globenewswire.com/NewsRoom/AttachmentNg/7eed81fc-ef70-4559-b31a-88f811a39fec

Figure 3: Section 13,075N (B-B' Figure 1) Showing New Results for Holes X22-23-042 and X22-23-069
https://www.globenewswire.com/NewsRoom/AttachmentNg/57080ef3-69e7-477a-a63a-20fbfa077f28

Table 1: Zone X22 Drill Results

Hole From
(m) To (m) Interval
(m) Inside/Outside
of PEA Pit Shell Au
Grade
(g/t) Cu
Grade
(%) Ag
Grade
(g/t) AuEq
Grade
(g/t)
X22-23-017
29.8 59 29.2 outside 0.42 0.07 1.06 0.52
incl 32 32.5 0.5 outside 1.20 0.07 1.10 1.30
incl 48 49 1 outside 1.55 0.19 4.10 1.83
incl 54 55 1 outside 1.31 0.04 0.25 1.36
incl 57 58 1 outside 0.79 0.10 1.10 0.93
65 66 1 outside 0.72 0.14 1.40 0.91
75 76 1 outside 0.75 0.09 0.70 0.87
77 78 1 outside 0.60 0.12 1.40 0.76
97 98 1 outside 1.29 0.05 0.25 1.36
115 116 1 outside 0.82 0.04 0.25 0.88
118 122 4 outside 0.91 0.07 3.43 1.03
134 135 1 outside 0.97 0.05 0.50 1.03
145 184 39 outside 0.56 0.06 0.85 0.65
incl 145 147 2 outside 0.75 0.15 1.15 0.96
incl 156 172 16 outside 0.74 0.08 1.39 0.86
incl 175 178 3 outside 1.02 0.10 1.07 1.16
incl 181 184 3 outside 0.76 0.03 0.40 0.81
X22-23-018
61 67 6 outside 0.45 0.07 1.05 0.55
incl 62 63 1 outside 0.90 0.10 1.20 1.04
86 97 11 outside 0.41 0.07 1.03 0.50
incl 95 97 2 outside 1.02 0.08 1.80 1.15
126 127 1 outside 0.97 0.03 1.00 1.02
X22-23-026
24 25 1 inside 0.98 0.06 2.00 1.07
X22-23-042
166 167 1 outside 102.50 0.82 26.80 103.81
188 189 1 outside 1.21 0.03 0.70 1.25
287 369 82 outside 0.70 0.10 0.84 0.83
incl 323 368 45 outside 0.92 0.13 1.10 1.09
X22-23-043
43 44 1 outside 0.72 0.15 1.60 0.93
51 52 1 outside 1.01 0.02 0.25 1.04
199 200 1 outside 0.83 0.09 2.98 0.98
incl 202 203 1 outside 1.65 0.22 5.70 1.99
incl 204 205 1 outside 1.43 0.09 3.90 1.58
217 219 2 outside 1.28 0.17 1.58 1.51
262 289 27 outside 0.69 0.08 1.18 0.80
incl 282 283 1 outside 1.96 0.22 4.40 2.28
incl 287 288 1 outside 2.18 0.21 1.70 2.46
327 332 5 outside 0.75 0.10 0.25 0.88
X22-23-044
81 82 1 outside 1.24 0.21 2.70 1.53
191 194 3 outside 4.71 0.24 1.67 5.03
incl 191 192 1 outside 9.54 0.47 3.30 10.17
incl 193 194 1 outside 3.96 0.20 0.90 4.23
202 207 5 outside 0.72 0.01 0.25 0.74
205 207 2 outside 1.33 0.01 0.25 1.34
247 248 1 outside 1.14 0.05 0.25 1.20
252 256 4 outside 0.71 0.09 13.45 0.97
incl 252 253 1 outside 0.97 0.33 52.70 1.95
incl 255 256 1 outside 1.75 0.02 0.60 1.78
266 267 1 outside 2.05 0.02 0.50 2.08
274 277 3 outside 0.68 0.05 1.58 0.76
incl 276 277 1 outside 1.15 0.07 3.50 1.28
288 290 2 outside 1.22 0.02 1.33 1.27
358 364 6 outside 0.95 0.01 0.73 0.97
incl 359 360.2 1.2 outside 2.30 0.02 1.80 2.34
incl 363 364 1 outside 1.18 0.00 0.25 1.18
386 399 13 outside 0.74 0.01 0.28 0.76
incl 386 388.15 2.15 outside 2.53 0.01 0.25 2.55
incl 398 399 1 outside 1.19 0.01 0.25 1.20
403 410 7 outside 0.68 0.02 0.53 0.70
incl 407 409 2 outside 1.17 0.04 0.90 1.23
X22-23-046
65 66 1 outside 0.76 0.52 6.80 1.48
72 73 1 outside 3.18 0.67 5.80 4.08
91 92 1 outside 6.93 0.27 6.50 7.33
218 219 1 outside 1.25 0.02 0.50 1.28
224 225 1 outside 15.55 0.01 0.25 15.57
240 241 1 outside 2.58 0.00 0.25 2.59
248 249 1 outside 3.26 0.01 0.25 3.27
264 265 1 outside 1.09 0.01 0.25 1.10
290 295 5 outside 1.24 0.02 0.30 1.27
incl 291 292 1 outside 2.84 0.03 0.50 2.89
incl 294 295 1 outside 2.04 0.03 0.25 2.08
408 409 1 outside 1.02 0.00 0.25 1.02
X22-23-056
15 28 13 outside 1.49 0.01 0.93 1.51
incl 24 28 4 outside 3.11 0.03 2.23 3.18
X22-23-057
17.6 20 2.4 outside 2.37 0.18 14.78 2.75
47 48 1 outside 1.05 0.00 0.25 1.06
92 94 2 outside 0.95 0.00 0.25 0.95
118 130 12 outside 1.37 0.00 0.25 1.38
incl 122 123 1 outside 4.93 0.00 0.25 4.94
incl 124 125 1 outside 2.95 0.00 0.25 2.96
incl 129 130 1 outside 3.38 0.01 0.25 3.40
139 140.5 1.5 outside 1.04 0.00 0.25 1.05
165 170.5 5.5 outside 1.57 0.08 5.19 1.72
incl 169.6 170.5 0.9 outside 7.16 0.29 19.10 7.72
X22-23-059
96 97 1 outside 25.90 0.10 6.20 26.09
111 112 1 outside 1.15 0.01 4.90 1.20
137 162 25 outside 0.68 0.01 0.47 0.71
incl 143 146 3 outside 1.25 0.02 0.55 1.28
incl 152 153 1 outside 3.05 0.07 2.50 3.17
173 180 7 outside 0.69 0.02 0.47 0.71
incl 175 177 2 outside 1.18 0.01 0.25 1.19
200 201 1 outside 3.00 0.12 2.10 3.18
X22-23-060
60 61 1 outside 1.16 0.09 3.10 1.30
191 192 1 outside 4.30 0.00 0.25 4.31
249 250 1 outside 2.47 0.01 0.25 2.48
X22-23-066
198 209 11 outside 3.20 0.06 2.16 3.29
incl 201 202 1 outside 24.40 0.07 6.90 24.56
212 213 1 outside 1.18 0.13 7.00 1.41
217 218 1 outside 0.84 0.13 7.10 1.08
341 342 1 outside 1.05 0.06 0.25 1.13
343 360 17 outside 3.04 0.04 0.52 3.10
incl 343 344 1 outside 3.81 0.02 0.25 3.84
incl 351 354 3 outside 7.24 0.01 0.25 7.26
incl 358 360 2 outside 6.26 0.01 0.58 6.28
371 372 1 outside 1.74 0.02 1.00 1.77
X22-23-067
171 178 7 outside 14.54 0.10 1.22 14.68
incl 171 171.6 0.6 outside 1.05 0.12 2.40 1.22
incl 171.6 172.3 0.7 outside 133.00 0.07 3.40 133.12
incl 175 176 1 outside 5.73 0.15 1.30 5.94
incl 177 178 1 outside 0.88 0.15 0.90 1.08
195 213 18 outside 0.73 0.08 1.01 0.84
incl 195 198 3 outside 1.09 0.07 1.97 1.21
incl 204 213 9 outside 0.93 0.11 0.98 1.07
317 318 1 outside 1.44 0.00 0.25 1.45
X22-23-069
106 109 3 outside 2.66 0.01 0.25 2.68
incl 106 107 1 outside 6.15 0.03 0.25 6.19
218 226 8 outside 0.81 0.10 0.89 0.94
incl 218 219.5 1.5 outside 1.05 0.05 0.80 1.12
incl 221 222 1 outside 0.83 0.14 1.00 1.02
incl 225 226 1 outside 1.20 0.08 0.50 1.31
259 314 55 outside 0.60 0.09 0.61 0.73
incl 272 273 1 outside 1.66 0.27 1.70 2.01
incl 285 286 1 outside 5.27 0.06 0.25 5.35
incl 298 299 1 outside 2.31 0.12 0.50 2.46
X22-23-070
125 127 2 outside 0.74 0.10 4.30 0.91
171.6 172.2 0.6 outside 10.60 0.44 9.70 11.25
297 324 27 outside 0.95 0.12 1.50 1.12
incl 297 298 1 outside 4.19 0.22 11.20 4.59
incl 302 303 1 outside 2.61 0.22 1.40 2.90

*Note drill intervals reported in this news release are down-hole core lengths as true thicknesses cannot be determined with available information.

Quality Assurance and Control

During the Zone X22 drill program, one meter assay samples were taken from NQ core and sawed in half. One-half was sent for assaying at ALS Laboratory, a certified commercial laboratory, and the other half was retained for results, cross checks, and future reference. A strict QA/QC program was applied to all samples, which included insertion of one certified mineralized standard and one blank sample in each batch of 25 samples. Every sample was processed with standard crushing to 85% passing 75 microns on 500 g splits. Samples were assayed by one-AT (30 g) fire assay with an AA finish and if results were higher than 3.5 g/t Au, assays were redone with a gravimetric finish. For QA/QC samples, a 50 g fire assay was done. In addition to gold, ALS laboratory carried out multi-element analysis for ME-ICP61 analysis of 33 elements four acid ICP-AES.

Qualified Person

The technical and scientific information in this press release has been reviewed and approved by Nicolas Guest, P.Geo., Senior Project Geologist, who is a Qualified Person as defined by NI 43-101. Mr. Guest is an employee of Troilus and is not independent of the Company under NI 43-101.

About Troilus Gold Corp.

Troilus Gold Corp. is a Canadian-based junior mining company focused on the systematic advancement and de-risking of the former gold and copper Troilus Mine towards production. From 1996 to 2010, the Troilus Mine produced +2 million ounces of gold and nearly 70,000 tonnes of copper. Troilus is located in the top-rated mining jurisdiction of Quebec, Canada, where is holds a strategic land position of 1,420 km² in the Frôtet-Evans Greenstone Belt. Since acquiring the project in 2017, ongoing exploration success has demonstrated the tremendous scale potential of the gold system on the property with significant mineral resource growth. The Company is advancing engineering studies following the completion of a robust PEA in 2020, which demonstrated the potential for the Troilus project to become a top-ranked gold and copper producing asset in Canada. Led by an experienced team with a track-record of successful mine development, Troilus is positioned to become a cornerstone project in North America.

For more information:

Caroline Arsenault
VP Corporate Communications
+1 (647) 407-7123
[email protected]

Cautionary Note Regarding Forward-Looking Statements and Information

Mineral Resources that are not Mineral Reserves do not have demonstrated economic viability; the estimate of Mineral Resources in the updated Mineral Resource statement may be materially affected by environmental, permitting, legal, title, taxation, socio-political, marketing, or other relevant issues. There is no certainty that the Indicated Mineral Resources will be converted to the Probable Mineral Reserve category, and there is no certainty that the updated Mineral Resource statement will be realized.

The PEA is preliminary in nature, includes inferred mineral resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves, and there is no certainty that the PEA will be realized. Mineral resources that are not mineral reserves do not have demonstrated economic viability. The PEA is subject to a number of risks and uncertainties. See below and the Company's latest technical report available on SEDAR for more information with respect to the key assumptions, parameters, methods and risks of determination associated with the foregoing.

This press release contains "forward-looking statements" within the meaning of applicable Canadian securities legislation. Forward-looking statements include, but are not limited to, statements regarding the impact of the ongoing drill program and results on the Company, the possible economics of the project and the Company's understanding of the project; the development potential and timetable of the project; the estimation of mineral resources; realization of mineral resource estimates; the timing and amount of estimated future exploration; the anticipated results of the Company's ongoing 2023 drill program and their possible impact on the potential size of the mineral resource estimate; costs of future activities; capital and operating expenditures; success of exploration activities; the anticipated ability of investors to continue benefiting from the Company's low discovery costs, technical expertise and support from local communities. Generally, forward-looking statements can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "continue", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "would", "will", "might" or "will be taken", "occur" or "be achieved". Forward-looking statements are made based upon certain assumptions and other important facts that, if untrue, could cause the actual results, performances or achievements of Troilus to be materially different from future results, performances or achievements expressed or implied by such statements. Such statements and information are based on numerous assumptions regarding present and future business strategies and the environment in which Troilus will operate in the future. Certain important factors that could cause actual results, performances or achievements to differ materially from those in the forward-looking statements include, amongst others, currency fluctuations, the global economic climate, dilution, share price volatility and competition. Forward-looking statements are subject to known and unknown risks, uncertainties and other important factors that may cause the actual results, level of activity, performance or achievements of Troilus to be materially different from those expressed or implied by such forward-looking statements, including but not limited to: there being no assurance that the exploration program will result in expanded mineral resources; risks and uncertainties inherent to mineral resource estimates; the impact the COVID 19 pandemic may have on the Company's activities (including without limitation on its employees and suppliers) and the economy in general; the impact of the recovery post COVID 19 pandemic and its impact on gold and other metals; the receipt of necessary approvals; general business, economic, competitive, political and social uncertainties; future prices of mineral prices; accidents, labour disputes and shortages; environmental and other risks of the mining industry, including without limitation, risks and uncertainties discussed in the most recent Technical Report and in other continuous disclosure documents of the Company available under the Company's profile at www.sedar.com. Although Troilus has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. Troilus does not undertake to update any forward-looking statements, except in accordance with applicable securities laws.

These press releases may also interest you

28 avr 2024
Invitation to a press and analyst conference in Stockholm for the presentation of Concentric's First Quarter 2024 results

At 10.00 CET media, investors and analysts are invited to Tändstickspalatset, Västra Trädgårdsgatan 15 in Stockholm, for a presentation of the report. There will also be an opportunity to participate via webcast/telephone conference. President & CEO...

28 avr 2024
Burgundy Diamond Mines reports first quarter 2024 results

Burgundy Diamond Mines (Burgundy or the company) provided its financial and operating results for the first quarter (Q1 2024) ended March 31, 2024 to the Australian Stock Exchange, on April 29, 2024. Burgundy maintained a robust EBITDA of $26...

28 avr 2024
AngleLock to Introduce World's First 7th Axis Linear Shaft Motor Gantry for Industry 4.0 at Automate 2024 Show

AngleLock will launch its newest product, Arrow-1, at Automate 2024 in Chicago May 6-9. The 7th Axis Linear Shaft Motor Gantry is the first of its kind, and it's designed for high speed, reliability, and precision motion....

28 avr 2024
Monport Mobility Protrude: Compact Powerhouse Redefining Laser Engraving

Monport, an industry frontrunner in laser engraving and cutting technology, introduces the groundbreaking Mobility Protrude series. This compact and potent CO2 laser engravers redefine efficiency and performance, all while maintaining an accessible...

27 avr 2024
2024 Shanghai International Automotive Manufacturing Technology & Material Show (AMTS) embraces New Energy Pioneering Smart Technology and strives in a new journey of globalization

Shanghai International Automotive Manufacturing Technology & Material Show (AMTS) first held in 2004, is the world's largest automotive engineering technology trade fair. Serving as a display platform for technology and products for 19 years, it is...

26 avr 2024
West Red Lake Gold Announces Mineral Resource Update for the Rowan Mine Deposit

West Red Lake Gold Mines Ltd. ("West Red Lake Gold" or "WRLG" or the "Company") announces an updated Mineral Resource Estimate ("MRE") effective as of March 1, 2024, on its 100% owned Rowan Mine Deposit, located in the Red Lake Gold District of...

More news about Mining industry...

News published on 11 july 2023 at 07:00 and distributed by:

Troilus Continues to Expand Zone X22, Drills High Grades of 103.81 g/t AuEq Over 1m, 14.68 g/t AuEq Over 7m, 3.10 g/t AuEq Over 17m and 3.29 g/t AuEq Over 11m

These press releases may also interest you

Le Lézard

Others sections

Follow us

Hole	From (m)	To (m)	Interval (m)	Inside/Outside of PEA Pit Shell	Au Grade (g/t)	Cu Grade (%)	Ag Grade (g/t)	AuEq Grade (g/t)
X22-23-017
	29.8	59	29.2	outside	0.42	0.07	1.06	0.52
incl	32	32.5	0.5	outside	1.20	0.07	1.10	1.30
incl	48	49	1	outside	1.55	0.19	4.10	1.83
incl	54	55	1	outside	1.31	0.04	0.25	1.36
incl	57	58	1	outside	0.79	0.10	1.10	0.93
	65	66	1	outside	0.72	0.14	1.40	0.91
	75	76	1	outside	0.75	0.09	0.70	0.87
	77	78	1	outside	0.60	0.12	1.40	0.76
	97	98	1	outside	1.29	0.05	0.25	1.36
	115	116	1	outside	0.82	0.04	0.25	0.88
	118	122	4	outside	0.91	0.07	3.43	1.03
	134	135	1	outside	0.97	0.05	0.50	1.03
	145	184	39	outside	0.56	0.06	0.85	0.65
incl	145	147	2	outside	0.75	0.15	1.15	0.96
incl	156	172	16	outside	0.74	0.08	1.39	0.86
incl	175	178	3	outside	1.02	0.10	1.07	1.16
incl	181	184	3	outside	0.76	0.03	0.40	0.81
X22-23-018
	61	67	6	outside	0.45	0.07	1.05	0.55
incl	62	63	1	outside	0.90	0.10	1.20	1.04
	86	97	11	outside	0.41	0.07	1.03	0.50
incl	95	97	2	outside	1.02	0.08	1.80	1.15
	126	127	1	outside	0.97	0.03	1.00	1.02
X22-23-026
	24	25	1	inside	0.98	0.06	2.00	1.07
X22-23-042
	166	167	1	outside	102.50	0.82	26.80	103.81
	188	189	1	outside	1.21	0.03	0.70	1.25
	287	369	82	outside	0.70	0.10	0.84	0.83
incl	323	368	45	outside	0.92	0.13	1.10	1.09
X22-23-043
	43	44	1	outside	0.72	0.15	1.60	0.93
	51	52	1	outside	1.01	0.02	0.25	1.04
	199	200	1	outside	0.83	0.09	2.98	0.98
incl	202	203	1	outside	1.65	0.22	5.70	1.99
incl	204	205	1	outside	1.43	0.09	3.90	1.58
	217	219	2	outside	1.28	0.17	1.58	1.51
	262	289	27	outside	0.69	0.08	1.18	0.80
incl	282	283	1	outside	1.96	0.22	4.40	2.28
incl	287	288	1	outside	2.18	0.21	1.70	2.46
	327	332	5	outside	0.75	0.10	0.25	0.88
X22-23-044
	81	82	1	outside	1.24	0.21	2.70	1.53
	191	194	3	outside	4.71	0.24	1.67	5.03
incl	191	192	1	outside	9.54	0.47	3.30	10.17
incl	193	194	1	outside	3.96	0.20	0.90	4.23
	202	207	5	outside	0.72	0.01	0.25	0.74
	205	207	2	outside	1.33	0.01	0.25	1.34
	247	248	1	outside	1.14	0.05	0.25	1.20
	252	256	4	outside	0.71	0.09	13.45	0.97
incl	252	253	1	outside	0.97	0.33	52.70	1.95
incl	255	256	1	outside	1.75	0.02	0.60	1.78
	266	267	1	outside	2.05	0.02	0.50	2.08
	274	277	3	outside	0.68	0.05	1.58	0.76
incl	276	277	1	outside	1.15	0.07	3.50	1.28
	288	290	2	outside	1.22	0.02	1.33	1.27
	358	364	6	outside	0.95	0.01	0.73	0.97
incl	359	360.2	1.2	outside	2.30	0.02	1.80	2.34
incl	363	364	1	outside	1.18	0.00	0.25	1.18
	386	399	13	outside	0.74	0.01	0.28	0.76
incl	386	388.15	2.15	outside	2.53	0.01	0.25	2.55
incl	398	399	1	outside	1.19	0.01	0.25	1.20
	403	410	7	outside	0.68	0.02	0.53	0.70
incl	407	409	2	outside	1.17	0.04	0.90	1.23
X22-23-046
	65	66	1	outside	0.76	0.52	6.80	1.48
	72	73	1	outside	3.18	0.67	5.80	4.08
	91	92	1	outside	6.93	0.27	6.50	7.33
	218	219	1	outside	1.25	0.02	0.50	1.28
	224	225	1	outside	15.55	0.01	0.25	15.57
	240	241	1	outside	2.58	0.00	0.25	2.59
	248	249	1	outside	3.26	0.01	0.25	3.27
	264	265	1	outside	1.09	0.01	0.25	1.10
	290	295	5	outside	1.24	0.02	0.30	1.27
incl	291	292	1	outside	2.84	0.03	0.50	2.89
incl	294	295	1	outside	2.04	0.03	0.25	2.08
	408	409	1	outside	1.02	0.00	0.25	1.02
X22-23-056
	15	28	13	outside	1.49	0.01	0.93	1.51
incl	24	28	4	outside	3.11	0.03	2.23	3.18
X22-23-057
	17.6	20	2.4	outside	2.37	0.18	14.78	2.75
	47	48	1	outside	1.05	0.00	0.25	1.06
	92	94	2	outside	0.95	0.00	0.25	0.95
	118	130	12	outside	1.37	0.00	0.25	1.38
incl	122	123	1	outside	4.93	0.00	0.25	4.94
incl	124	125	1	outside	2.95	0.00	0.25	2.96
incl	129	130	1	outside	3.38	0.01	0.25	3.40
	139	140.5	1.5	outside	1.04	0.00	0.25	1.05
	165	170.5	5.5	outside	1.57	0.08	5.19	1.72
incl	169.6	170.5	0.9	outside	7.16	0.29	19.10	7.72
X22-23-059
	96	97	1	outside	25.90	0.10	6.20	26.09
	111	112	1	outside	1.15	0.01	4.90	1.20
	137	162	25	outside	0.68	0.01	0.47	0.71
incl	143	146	3	outside	1.25	0.02	0.55	1.28
incl	152	153	1	outside	3.05	0.07	2.50	3.17
	173	180	7	outside	0.69	0.02	0.47	0.71
incl	175	177	2	outside	1.18	0.01	0.25	1.19
	200	201	1	outside	3.00	0.12	2.10	3.18
X22-23-060
	60	61	1	outside	1.16	0.09	3.10	1.30
	191	192	1	outside	4.30	0.00	0.25	4.31
	249	250	1	outside	2.47	0.01	0.25	2.48
X22-23-066
	198	209	11	outside	3.20	0.06	2.16	3.29
incl	201	202	1	outside	24.40	0.07	6.90	24.56
	212	213	1	outside	1.18	0.13	7.00	1.41
	217	218	1	outside	0.84	0.13	7.10	1.08
	341	342	1	outside	1.05	0.06	0.25	1.13
	343	360	17	outside	3.04	0.04	0.52	3.10
incl	343	344	1	outside	3.81	0.02	0.25	3.84
incl	351	354	3	outside	7.24	0.01	0.25	7.26
incl	358	360	2	outside	6.26	0.01	0.58	6.28
	371	372	1	outside	1.74	0.02	1.00	1.77
X22-23-067
	171	178	7	outside	14.54	0.10	1.22	14.68
incl	171	171.6	0.6	outside	1.05	0.12	2.40	1.22
incl	171.6	172.3	0.7	outside	133.00	0.07	3.40	133.12
incl	175	176	1	outside	5.73	0.15	1.30	5.94
incl	177	178	1	outside	0.88	0.15	0.90	1.08
	195	213	18	outside	0.73	0.08	1.01	0.84
incl	195	198	3	outside	1.09	0.07	1.97	1.21
incl	204	213	9	outside	0.93	0.11	0.98	1.07
	317	318	1	outside	1.44	0.00	0.25	1.45
X22-23-069
	106	109	3	outside	2.66	0.01	0.25	2.68
incl	106	107	1	outside	6.15	0.03	0.25	6.19
	218	226	8	outside	0.81	0.10	0.89	0.94
incl	218	219.5	1.5	outside	1.05	0.05	0.80	1.12
incl	221	222	1	outside	0.83	0.14	1.00	1.02
incl	225	226	1	outside	1.20	0.08	0.50	1.31
	259	314	55	outside	0.60	0.09	0.61	0.73
incl	272	273	1	outside	1.66	0.27	1.70	2.01
incl	285	286	1	outside	5.27	0.06	0.25	5.35
incl	298	299	1	outside	2.31	0.12	0.50	2.46
X22-23-070
	125	127	2	outside	0.74	0.10	4.30	0.91
	171.6	172.2	0.6	outside	10.60	0.44	9.70	11.25
	297	324	27	outside	0.95	0.12	1.50	1.12
incl	297	298	1	outside	4.19	0.22	11.20	4.59
incl	302	303	1	outside	2.61	0.22	1.40	2.90