Le Lézard
Classified in: Mining industry
Subject: ANALYSTS' COMMENTS

Eloro Resources Intersects 150.47 g Ag eq/t (9.45 g Ag/t, 1.53% Zn, 0.88% Pb and 0.07% Sn) over 441.21m in High-Grade Feeder Zone in Santa Barbara Target Area at the Iska Iska Silver-Tin Polymetallic Project, Potosi Department, Bolivia


TORONTO, Sept. 20, 2022 (GLOBE NEWSWIRE) -- Eloro Resources Ltd. (TSX-V: ELO; OTCQX: ELRRF; FSE: P2QM) ("Eloro", or the "Company") is pleased to announce assay results from twenty-one (21) diamond drill holes from its on-going drilling program at the Iska Iska silver-tin polymetallic project in the Potosi Department, southern Bolivia. Five (5) surface holes (DSB-28 to DSB-30, DSB-32 and DHK-25) tested the high-grade feeder zone in Santa Barbara which was also tested by two (2) underground holes (DSBU-09 and DSBU-011). Six (6) holes (DSB-16 to DSB-19, DSB-23 and DSB-27) tested the northwest extension of Santa Barbara. Eight (8) holes (DPC-04 to DPC-08 and DPC-10 to DPC-12) are reported for the Porco area. Five surface drills are focused on completing drilling in the Santa Barbara Resource Definition Drilling Area and its extension to the south-southeast. This press release also outlines a major update on the geophysical surveys which have greatly expanded the higher-grade feeder area target zone to the south-southeast.

Overall, the Company has completed 74,782m in 113 drill holes to-date at Iska Iska, including five holes in progress, as shown in Figure 1. Tables 1 to 3 list significant assay results for the drill holes reported. Prices used for calculating Ag equivalent grades are as outlined in the July 18, 2022 press release. Table 4 summarizes drill holes with assays pending. Highlights for each major target area are as follows:

Santa Barbara High Grade Feeder Zone Definition Drilling.

Drilling continues to expand the extent of the high-grade feeder zone at Santa Barbara, especially to the south-southeast. New borehole geophysical data have significantly expanded the strike length of this important high-grade zone. The highly conductive zones correlate very well with previously released high grade drill intersections, as described below. The conductivity data from boreholes have extended the high-grade feeder zone a further 250m along strike to the south-southeast. The 3D inverse magnetic model which correlates very strongly with the conductive zone suggests that the high-grade feeder zone may extend across the entire caldera for as much as a further 1 km along strike. The definition drill program has now been modified to sectionally drill this highly prospective extension, with the intention of defining a major open pittable mineral resource in the valley of the caldera.

Tom Larsen, CEO of Eloro said: "The results presented in this press release, combined with the enhanced geological and geophysical interpretation, show the continuing expansion of the already extensive Iska Iska high-grade mineralized system, which has a potential strike length of at least 2km. The new data demonstrate excellent potential to outline a major open pittable deposit in the valley of the Iska Iska caldera. As a result, the estimated completion date for the maiden NI 43-101 mineral resource has been pushed back to the end of Q1 2023 to provide additional time to drill-test this important target. We thank both ALS and AHK laboratories for greatly reducing our backlog of samples over the last several months, enabling us to report the results from a large number of holes in this release."

Dr. Bill Pearson, P.Geo. Eloro's Executive Vice President, Exploration commented: "We are continuing our definition diamond drill program with five surface rigs focusing on the south-southeastern extension of the high-grade feeder zone. As each drill hole is completed, we survey the hole using a pole-dipole IP array down the hole as well as cross hole measurements using current in surrounding holes. Our borehole IP team from McKeown Exploration Services, which is supervised by our Chief Geophysicist Dr. Chris Hale, P.Geo., works closely with our drill contractor Leduc Drilling to allow holes to a 1000m depth to be surveyed efficiently. This has greatly enhanced our geophysical program and has led to the tremendous geophysical model disclosed in this press release. We continue to get numerous and extensive mineralized intersections in all our holes as outlined below. In addition, we now know that the DPC series of holes in the Porco area are mainly just on the edge of the massive conductive zone and magnetic susceptibility high that goes through the Porco area at a deeper level."

Significant results from five (5) additional surface drill holes and two underground holes testing the high-grade feeder zone at Santa Barbara are as follows:

A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/7a99bfe9-a783-49ac-90c4-a23bef1e5a75

Major Extension of Santa Barbara High Grade Feeder Zone.

As noted above, new borehole geophysical data have significantly expanded the strike length of the important high-grade feeder zone at Santa Barbara. The highly conductive zones correlate very well with previously released high grade drill intersections. Figure 2 is a NW-SE longitudinal section showing the geophysical results in the Santa Barbara high grade feeder zone. Based on current data, this feeder zone has a potential overall strike length of at least 2km. Figure 3 is a view looking south across the Iska Iska caldera valley and Figure 4 shows the conductivity model in the same view as Figure 3.

Eloro's Chief Geophysicist, Dr. Chris Hale, P.Geo. commented: "The geophysical measurements of the most recent boreholes have contributed to a clear picture extending the mineralization south-southeastwards from the mineralization reported in Eloro's July 18, 2022 press release. Where we have borehole IP and conductivity data a conductive core of mineralization extends to the south-southeast for 250m. This conductive core is contained within a broad volume of elevated chargeability that reflects disseminated mineralization. The geophysical correlation is open at depth and to the east where it is only limited by the distribution of drill holes for the borehole IP measurements. A strong correlation of mineralization with both conductivity and magnetic susceptibility extends toward the south-southeast and likely continues for a further kilometer or more at depth where the magnetic susceptibility model indicates an extension but where we do not yet have any conductivity data other than for DPC-08 and DPC-09. Conductivity data for DPC-09 show that this south-directed hole is tangential to a strong off-hole conductivity just to the west. This conductivity anomaly merges with the magnetic susceptibility model showing that the Santa Barbara high grade feeder zone extends deep beneath the known Porco mineralization."

Photos accompanying this announcement are available at
https://www.globenewswire.com/NewsRoom/AttachmentNg/083a6d95-30ed-40d8-bf8d-300a6b3be0a0
https://www.globenewswire.com/NewsRoom/AttachmentNg/d4061dd1-8d77-47b9-9a22-b310d8f54ec0
https://www.globenewswire.com/NewsRoom/AttachmentNg/4ff03a7d-b591-4e32-9ec0-49d4dba57c74

Reinterpretation and Significance of Drilling in the Porco Area.

Results for eight (8) diamond drill holes that tested the magnetic susceptibility anomaly in the Porco area are summarized in Table 2. Locations of these holes are shown on Figure 1. Holes DPC-04, DPC-05 and DPC-06 were drilled from the Porco radial drill platform. Hole DPC-07 was drilled at an azimuth of 235° at -60° across the gap area between the Porco and Central Breccia pipes. Holes DPC-08 (Az 235°, -65°), DPC-10 (Az 225°, -70°) and DPC-11-12 (both Az 235°, -70°) were drilled from the access road to the Porco radial platform. Results from DPC-09 (Az 180°, -75°) were previously released on June 14, 2022. Highlights are as follows:

All the Porco holes reported in this release are on the margins of the conductive/magnetic anomalies, hence the presence of widespread higher-grade mineralization on the edge of these anomalies is very encouraging. Further drilling will be carried out to test the core of the geophysical anomalies in these areas.

Surface Diamond Drilling, Northwest Extension, Santa Barbara.

Results for six (6) diamond drill holes that tested the potential northwest extension of the Santa Barbara zone are summarized in Table 1. Locations of these holes are shown on Figure 1. Holes from southeast to northwest are DSB-23, DSB-18 and DSB-19 on the same section, DSB-17, DSB-27 and the northwesternmost hole DSB-16, which collectively cover a strike length of approximately 600m. Highlights are as follows:

Table 1: Significant Results, Surface Diamond Drilling, Santa Barbara Resource Definition Target Area as at September 20, 2022.

SANTA BARBARA RESOURCE DEFINITION TARGET ZONE
SURFACE DIAMOND DRILLING
Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DSB-3010.6222.7612.1414.470.040.010.160.010.050.0090.00147.22
 28.70469.91441.219.450.071.530.880.020.070.0040.009150.47
Incl.80.05182.35102.3010.060.022.760.980.030.070.0020.015209.30
Incl.220.10275.7555.6511.870.091.791.690.030.080.0060.018200.61
Incl.308.72344.7236.006.510.102.311.730.040.150.0110.011249.57
 477.45489.7312.2830.780.150.140.360.030.210.0070.001149.09
 494.28501.777.497.360.011.090.140.010.100.0010.005105.73
 516.82554.6037.7843.860.070.040.020.020.100.0080.00195.16
 569.68581.7812.1011.080.020.140.020.010.140.0010.00176.82
 598.42613.4515.0326.060.040.390.070.010.160.0030.001113.36
 622.55651.1328.588.270.010.520.120.010.090.0010.00276.40
 658.77670.6611.895.290.020.350.050.010.070.0010.00253.39
 682.70691.658.9517.650.020.420.050.000.060.0140.00270.40
 703.64709.706.0619.000.080.060.010.070.310.0210.001160.63
 723.23726.283.057.070.460.030.010.030.060.0050.00177.99
 733.87735.381.5135.000.040.060.010.360.390.1090.001255.55
 780.80785.264.463.640.400.050.010.020.040.0050.00162.60
 794.38797.383.001.000.010.030.010.000.160.0010.00165.53
 803.34804.861.521.000.060.010.010.030.220.0030.00196.30
 894.77896.271.5010.000.090.020.010.060.060.0350.00157.35
 905.27909.854.582.640.010.830.140.010.030.0010.00360.64

Note: True width of the mineralization is not known at the present time, but based on the current understanding of the relationship between drill orientation/inclination and the mineralization within the breccia pipes and the host rocks such as sandstones and dacites, it is estimated that true width ranges between 70% and 90% of the down hole interval length but this will be confirmed by further drilling and geological modelling.

Chemical symbols: Ag= silver, Au = gold, Zn = zinc, Pb = lead, Cu = copper, Sn = tin, Bi = bismuth, Cd = cadmium and g Ag eq/t = grams silver equivalent per tonne. Quantities are given in percent (%) for Zn, Pb Cu, Sn, Bi and Cd and in grams per tonne (g/t) for Ag, Au and Ag eq.

Metal prices and conversion factors used for calculation of g Ag eq/t (grams Ag per grams x metal ratio) are as follows: (Prices updated as of July 21, 2022, to more accurately reflect current metal prices):

ElementPrice $US (per kg)Ratio to Ag
Ag$607.001.0000
Sn$23.550.0589
Zn$2.980.0046
Pb$1.920.0032
Au$54,932.8079.7221
Cu$7.000.0134
Bi$12.760.0177
Cd$5.500.0076

In calculating the intersections reported in this press release a sample cutoff of 30 g Ag eq/t was used with generally a maximum dilution of 3 continuous samples below cutoff included within a mineralized section unless more dilution is justified geologically.

The equivalent grade calculations are based on the stated metal prices and are provided for comparative purposes only, due to the polymetallic nature of the deposit. Metallurgical tests are in progress by Blue Coast Ltd. to establish levels of recovery for each element reported but currently the potential recovery for each element has not yet been established. While there is no assurance that all or any of the reported concentrations of metals will be recoverable, Bolivia has a long history of successfully mining and processing similar polymetallic deposits which is well documented in the landmark volume "Yacimientos Metaliferos de Bolivia" by Dr. Osvaldo R. Arce Burgoa, P.Geo.

Table 1 Continued

Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq**
g/tg/t%%%%%%g/t
DSB-320.00135.15135.1544.550.070.090.570.140.250.00330.002185.94
Incl.45.13111.1766.0478.120.090.011.010.270.330.00400.003277.34
 181.48186.064.586.930.050.640.040.020.020.00370.00156.48
 196.53201.054.521.790.260.010.020.030.040.05290.00157.35
 205.58207.021.443.400.030.230.040.020.080.01600.00154.18
 226.48227.951.475.000.020.351.000.020.050.00500.00177.16
 245.08255.6310.558.060.030.510.030.030.040.00400.00156.97
 266.12275.108.984.350.060.240.050.060.060.00960.00156.42
 281.15284.092.941.300.010.530.120.020.050.00300.00256.04
 314.11324.6010.4916.120.030.160.000.040.050.00640.00151.51
 328.89331.882.9916.380.070.300.000.050.050.01530.00165.91
 334.88337.893.0116.530.020.290.000.050.040.01150.00157.87
 357.07358.531.4635.900.040.030.040.050.060.01200.00171.92
 369.06370.551.4973.200.040.030.020.040.010.00600.00188.21
 390.05403.5413.515.520.050.040.030.040.150.01290.00177.95
 408.08409.541.464.000.020.050.050.060.080.00900.00150.70
 444.37445.901.537.200.100.130.020.950.210.20100.001257.04
 472.97474.421.454.000.010.010.010.000.310.00100.001124.51
 483.52485.051.533.400.100.150.010.010.080.00100.00151.50
 486.58488.121.541.600.010.090.010.000.140.00100.00161.19
 552.02553.521.5013.900.010.010.000.110.100.01600.00170.77
 556.52559.512.996.310.010.070.010.120.110.01450.00170.47
 609.66611.171.517.800.060.230.120.000.060.00100.00151.43
 656.13657.631.504.600.400.010.010.020.020.00500.00152.58
 683.40684.901.5011.200.010.440.350.110.090.00100.00191.85
 702.91704.381.472.100.850.010.010.010.010.01500.00188.37
 897.93908.5010.573.880.050.000.000.300.010.15220.00178.45
 911.45916.004.552.580.020.000.000.250.010.09890.00157.20
 920.64922.161.521.600.050.000.000.360.000.01800.00152.14
 923.68925.221.542.500.030.520.000.250.000.00300.00161.10

 

Table 1 Continued

Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DSB-290.0014.1014.1023.680.060.000.260.010.100.0070.00178.83
 93.1897.624.444.640.031.350.180.010.000.0010.00883.20
 109.60118.709.104.480.011.010.370.000.000.0010.00368.14
 121.76123.261.506.000.011.200.370.000.000.0010.00278.70
 127.81129.321.516.000.021.080.210.000.000.0020.00168.76
 144.33147.312.982.980.031.030.140.040.000.0010.00266.13
 153.25191.0037.754.530.041.130.170.010.000.0020.00372.73
Incl.169.88174.444.5614.670.212.570.450.080.000.0110.009187.84
 197.07209.1412.073.110.021.170.210.000.000.0010.00371.50
 225.70244.0018.3020.050.112.181.000.050.040.0070.008191.20
Incl.225.70234.909.2037.880.183.351.780.100.070.0130.013315.40
 253.00278.6825.685.280.011.170.430.020.050.0010.00498.28
 310.32311.801.488.000.031.210.360.010.060.0010.005105.55
 320.94431.34110.4014.310.080.810.400.010.080.0020.004108.31
Incl.334.66370.7236.0618.660.171.430.880.010.100.0030.007174.81
 445.63504.4958.8613.320.220.440.040.010.060.0020.00180.18
 521.10525.704.605.670.010.630.020.010.070.0010.00167.17
 561.15562.601.455.000.040.910.020.010.020.0010.00262.48
 586.31587.781.4712.000.060.830.030.010.010.0390.00170.39
 596.84599.822.9822.360.120.340.040.010.020.0510.00172.72
 611.86613.401.545.000.010.980.460.010.020.0010.00376.63
 634.60645.3010.707.130.030.240.140.010.120.0030.00173.89
 666.32679.9513.6311.900.060.490.080.010.110.0920.002106.53
 707.22714.777.558.590.011.000.130.010.030.0040.00477.61
 749.54751.031.4910.000.011.490.090.010.050.0010.008109.33
 757.06758.581.522.000.011.290.160.020.010.0020.00579.93
 785.57787.071.5015.000.022.020.510.010.340.0010.013265.39
 799.10800.601.501.000.650.360.020.010.020.0680.001101.97
 809.56814.024.462.460.980.390.080.010.010.0340.001125.91
 823.11836.5813.474.410.190.380.040.030.030.0200.00259.64
 847.11875.8728.769.820.220.160.090.070.030.0190.00163.48
 880.40881.881.481.000.100.020.000.020.170.0020.00179.70
 954.12982.4028.286.230.080.360.210.030.090.0040.00178.38
 993.01995.962.952.020.130.220.210.020.060.0330.00164.88
 1011.101021.5710.4752.140.040.110.200.040.090.0110.001111.05
 1086.261087.791.5316.000.050.030.050.050.060.0030.00152.50
 1102.831104.341.5115.000.060.320.020.080.050.0070.00164.79
 1125.411127.001.5942.000.070.010.020.020.010.0130.00156.70

 Table 1 Continued

Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DSB-280.0024.1024.1013.970.020.010.180.010.050.0030.00144.83
 39.49136.0096.514.410.021.160.490.030.040.0020.00898.98
Incl.74.2090.7216.522.990.022.681.130.030.110.0060.018220.47
 142.02146.664.640.660.010.860.150.010.010.0010.00754.06
 163.17253.3590.185.490.051.360.310.010.010.0030.00494.39
 262.40263.911.512.000.010.820.850.020.020.0010.00380.45
 269.92272.973.053.540.020.850.320.020.010.0010.00261.67
 275.96277.481.527.000.012.290.690.010.010.0010.006147.23
 283.45287.974.522.010.021.150.330.010.000.0010.00272.93
 307.50339.3231.826.500.121.110.290.010.020.0020.00489.74
 357.49388.9131.422.050.170.830.130.010.020.0010.00272.64
Incl.371.07376.875.802.010.831.030.230.000.070.0050.001163.61
 401.03408.527.492.000.040.940.270.010.030.0010.00171.60
 413.12419.176.052.510.080.690.290.000.030.0010.00164.41
 423.84428.514.672.340.010.810.230.010.020.0010.00259.83
 440.42443.402.985.000.010.940.240.000.030.0010.00172.29
 455.52541.8486.3231.120.100.270.230.010.050.0020.00183.44
Incl.458.57464.636.0656.420.230.832.380.010.220.0020.002278.75
Incl.520.85531.4410.59136.450.220.390.110.030.040.0030.001197.15
 564.39578.0013.6160.400.010.090.010.010.030.0010.00179.07
 581.04582.591.552.000.010.100.010.000.140.0010.00163.44
 587.07588.581.5110.000.011.320.010.010.050.0010.00698.38
 620.44638.5818.1411.660.030.700.020.010.070.0070.00378.79
 650.68653.753.073.980.010.980.010.010.040.0010.00470.00
 700.45707.987.534.220.010.630.110.010.030.0010.00150.83
 715.42719.924.507.300.010.490.230.010.040.0010.00155.63
 824.14831.807.662.010.160.190.030.010.060.0150.00152.98

 Table 1 Continued

Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DHK-256.6541.1434.4934.300.031.140.860.040.010.0060.006129.99
Incl.23.0530.717.6648.350.022.041.400.020.010.0010.010200.48
 68.3769.881.5145.000.053.781.010.040.020.0110.014282.41
 80.4081.901.502.000.011.180.130.010.010.0010.00969.07
 119.40120.921.525.000.010.910.120.020.010.0010.00359.80
 134.48136.001.5210.000.011.510.290.010.010.0010.004100.81
 151.05152.551.509.000.171.950.330.020.020.0010.005141.98
 182.80185.803.000.755.190.670.120.020.010.0250.002519.34
 203.86212.899.031.080.010.850.060.010.000.0010.00147.79
 217.40218.921.522.000.010.890.700.010.000.0010.00370.82
 221.90223.401.503.000.011.000.330.010.010.0010.00367.05
 226.48227.981.508.000.012.510.490.020.010.0010.012152.28
 238.54240.041.5015.000.042.110.470.020.020.0010.006147.62
 244.53246.041.516.000.080.870.390.010.010.0010.00475.05
 250.61252.101.497.000.051.240.620.010.020.0010.007100.96
 268.57270.081.515.000.010.950.060.010.000.0010.00456.21
 286.63289.582.956.490.011.470.250.010.010.0010.00491.91
 321.12349.6428.5215.790.011.770.430.010.010.0010.005123.25
Incl.321.12334.6413.5223.120.012.940.630.010.020.0010.009197.65
 366.29388.9522.6623.370.011.450.810.010.020.0010.005129.94
Incl.366.29373.857.5642.530.023.351.720.020.050.0010.012286.76
 397.98400.993.014.510.011.220.190.010.010.0010.00376.94
 410.06420.4710.415.790.021.620.340.010.020.0010.006108.03
 446.08458.1812.104.460.011.260.280.010.020.0010.00583.28
 474.67476.211.548.000.033.200.610.010.040.0010.012203.02
 486.75489.763.010.750.011.250.190.000.010.0010.00471.96
 503.40507.904.500.670.012.000.430.000.010.0010.004119.35
 515.40516.901.502.000.010.960.280.000.010.0010.00362.70
 524.50528.984.480.670.010.890.210.010.010.0010.00355.64
 542.50554.6112.110.560.010.890.150.010.010.0010.00254.57
 565.27571.396.121.500.011.000.240.010.010.0010.00366.45
 581.94583.421.480.500.011.640.430.000.000.0010.00697.28
 595.30616.1420.842.630.031.350.240.000.010.0060.00285.88
 620.65623.602.952.000.010.740.150.010.030.0010.00156.38
 628.15629.661.514.000.610.650.030.000.010.0150.00298.42
 638.67646.107.4319.970.190.310.030.010.020.0280.00169.20
 659.65662.592.940.750.270.500.060.030.000.0010.00156.39
 671.69677.716.0210.620.011.540.350.030.050.0010.006119.89
 691.24701.6910.4511.550.011.060.280.000.020.0010.00283.43
 704.61706.111.5019.000.020.360.320.000.060.0010.00171.05
 721.09751.1830.099.740.120.450.280.020.030.0020.00165.12
 767.70769.301.600.500.630.030.010.010.000.0010.00161.99
 889.43890.921.4923.000.110.010.010.120.120.0100.00195.68
 949.83951.341.5110.000.091.190.060.020.020.0460.00199.34
 1011.681013.201.526.000.041.290.100.110.070.1350.003143.17
 1019.271020.791.521.000.060.000.000.050.010.2980.00176.61
 1042.131043.631.5039.000.060.010.000.080.020.1690.00196.80
 1058.871060.401.534.000.020.010.010.180.010.2140.00177.41
 1080.001081.561.563.000.050.020.010.220.010.1390.00166.89
 1102.781107.334.554.010.030.010.000.280.010.0960.00164.69
 1119.261120.751.492.000.010.060.020.160.030.0770.00153.03
 1132.781135.963.187.250.020.351.050.240.050.0250.001112.55
 1152.471154.001.533.000.540.050.010.150.010.0290.00181.42


Table 2: Significant Results, Underground Diamond Drilling, Santa Barbara Resource
Definition Target Area as at September 20, 2022.

SANTA BARBARA RESOURCE DEFINITION TARGET ZONE
UNDERGROUND DIAMOND DRILLING
Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DSBU-110.00128.33128.3314.930.050.440.680.070.060.0020.00496.24
 134.45135.961.510.500.011.380.190.020.010.0010.00382.16
 143.51184.4240.912.380.040.820.400.020.040.0020.00375.55
 193.46207.124.653.670.031.350.610.020.040.0010.007109.60
 217.80225.417.617.570.211.560.300.020.040.0010.005132.41
 232.86252.5019.644.420.700.680.080.020.040.0050.002121.87
 260.03263.163.1313.470.070.280.340.010.030.0010.00255.46
 270.60290.1819.5817.010.241.110.510.020.140.0020.005167.84
 297.72314.1016.383.110.760.270.060.010.050.0080.001106.61
 322.94340.6617.7218.400.360.920.400.010.080.0120.005145.61
 351.22352.821.6011.000.020.870.430.010.030.0020.00481.85
 366.26381.5915.3322.400.010.280.100.020.110.0010.00186.41
 389.18403.9814.8019.850.420.210.010.010.020.0060.00177.40
 419.08420.591.5116.000.220.330.010.020.020.0020.00162.68
 426.65428.151.5022.000.020.330.010.030.030.0010.00156.23
 431.18432.681.5024.000.100.360.010.010.020.0010.00161.39
 449.27624.03174.7615.760.050.550.130.010.080.0010.00285.35
 629.80631.141.343.000.020.540.040.010.070.0010.00161.91
 637.03654.1317.108.950.040.710.200.010.040.0020.00270.71
 660.17661.701.533.000.011.000.090.000.060.0010.00479.57
 675.26750.2574.998.000.201.680.230.010.040.0190.006138.03
 761.31762.741.431.000.011.030.090.010.020.0010.00263.70
 766.20769.203.001.500.030.950.080.020.020.0010.00362.80
 780.70785.644.942.600.010.850.090.020.020.0010.00156.90
DSBU-090.0048.3448.3446.930.190.230.560.130.080.0070.004140.75
Incl.22.7839.3116.53112.290.440.010.730.260.070.0080.001235.56
 72.3575.332.981.500.021.020.140.020.020.0020.00368.12
 79.8496.5616.720.820.011.150.530.020.020.0010.00485.58
 110.16140.3730.213.910.010.190.430.020.030.0010.00142.83
 165.37212.0046.6311.300.031.860.850.010.040.0040.010152.47
 225.55297.9072.357.200.141.850.430.020.020.0100.006136.48
Incl.270.71291.8121.1015.930.202.470.630.040.030.0080.011192.92
 310.13313.102.971.240.020.930.080.010.000.0010.00253.78
 334.10335.791.692.000.021.150.080.010.010.0010.00366.52
 338.99346.127.131.790.010.900.160.010.010.0010.00355.31
 364.14373.098.954.550.041.370.160.010.010.0010.00583.52
 427.07428.651.585.000.041.200.150.010.000.0010.00474.79
 431.53438.957.429.630.010.960.230.010.010.0010.00367.83
 448.03449.341.3126.000.043.880.600.020.010.0050.016246.68
 464.33478.0013.677.960.010.650.230.010.000.0010.00251.62
 493.03494.611.586.000.420.260.150.020.010.0450.00174.91
 499.13503.954.821.700.010.800.130.010.000.0010.00148.29
 506.63508.141.514.000.011.600.170.020.010.0010.00794.04
 514.01530.5116.505.730.010.860.160.010.010.0010.00256.75
 558.80567.949.1410.030.010.600.230.000.000.0010.00249.89
 576.91585.898.9810.590.010.560.320.010.010.0010.00252.42
 596.58617.2220.646.310.010.780.190.010.000.0010.00254.11
 633.77656.5422.778.200.010.600.290.010.010.0010.00152.02
 685.02757.2272.2013.050.111.660.420.020.050.0020.006138.75
Incl.691.02700.008.9848.010.122.791.650.020.130.0030.011303.26
Incl.715.11722.647.5318.150.535.400.360.030.060.0070.021374.34
 763.23787.5924.365.180.100.850.180.010.030.0010.00275.93
 808.88831.4622.585.190.031.050.320.010.030.0010.00483.82
 837.74840.712.979.880.011.490.500.010.030.0010.007113.61
 890.16891.661.506.000.041.450.850.020.050.0010.005131.11

 See Note Table 1.

Table 2: Significant Results, Surface Diamond Drilling, Porco Target Area as at September 20, 2022.

PORCO AREA DIAMOND DRILLING
Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DPC-1265.1566.631.4817.000.021.040.610.030.010.0050.00495.88
 156.73162.535.801.890.010.980.150.000.000.0030.00257.71
 235.87237.391.524.900.011.120.250.010.010.0030.00172.63
 328.41329.901.491.900.021.220.170.000.000.0010.00570.85
 352.35359.837.489.180.031.060.190.060.000.0010.00477.82
 410.66413.622.9658.260.012.491.580.020.010.0010.014239.74
 437.65439.101.459.800.011.380.240.000.010.0010.00691.92
 458.64460.101.4611.800.011.280.700.010.010.0010.003103.96
 565.44566.921.485.200.040.780.050.010.010.0030.00454.09
 571.54573.051.516.200.021.350.110.010.000.0010.00780.21
 607.54613.435.894.560.130.590.020.010.010.0070.00353.99
 673.90678.464.5649.010.050.120.040.050.010.1060.00194.79
 684.59685.991.4040.400.060.030.040.050.010.0930.00176.14
 719.05720.581.5334.500.190.980.050.210.060.0350.004154.13
 744.51747.613.1029.820.080.100.040.180.060.1530.001120.04
 761.22764.253.0325.580.021.570.300.090.010.0200.007132.46
 770.28771.741.4623.800.021.480.100.070.010.0460.009122.41
 777.82779.401.5884.100.141.260.450.580.010.0950.006262.25
 807.76809.221.469.200.011.480.260.040.010.0040.005102.03
 825.65828.703.054.100.010.950.110.010.010.0020.00563.39
 851.28852.761.4816.800.191.210.410.050.040.2740.005184.43
 863.29864.791.509.200.090.860.490.020.010.1360.004109.73
 884.40899.2514.8513.730.020.870.060.040.020.0030.00572.26
 917.40918.901.5013.200.040.830.530.020.010.0060.00581.37
 923.45924.951.5011.100.010.720.210.010.010.0010.00460.60
 927.90929.401.5013.300.010.400.250.030.030.0040.00156.69

See Note Table 1.

Table 2 Continued

Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DPC-110.0011.5311.532.690.010.010.030.000.130.0010.00155.46
 94.1595.691.541.100.010.900.030.010.010.0010.00351.49
 178.70180.181.4824.400.231.720.960.010.010.0060.007165.73
 185.52187.001.483.200.010.480.780.000.010.0010.00155.82
 211.12212.631.510.300.011.330.010.000.010.0010.00169.18
 241.07250.008.9316.340.162.140.810.020.020.0030.012171.01
 271.20277.256.053.410.141.110.170.010.010.0020.00580.85
 331.21332.741.533.100.011.520.100.010.010.0010.00585.40
 364.47367.462.9950.320.488.671.090.050.050.0530.041595.23
 377.92380.862.940.510.030.400.030.000.110.0010.00168.27
 385.32386.741.420.300.010.300.010.000.110.0010.00159.84
 392.40408.8616.465.090.051.770.130.010.060.0010.005126.42
 421.33425.814.485.180.061.230.030.020.010.0010.00380.48
 434.95436.411.463.500.320.710.060.020.010.0090.00178.37
 451.12452.681.5615.800.021.620.340.010.050.0010.005127.02
 543.99545.521.53199.301.291.410.810.090.420.0310.008592.96
 560.58562.101.521.500.010.060.310.010.230.0010.001104.77
 572.60577.154.551.700.011.360.010.020.010.0010.00177.26
 599.78601.281.50124.900.160.060.050.090.160.0100.001218.11
 617.88619.351.473.600.150.590.010.010.020.0010.00254.34
 627.01628.461.451.900.011.010.100.010.020.0010.00162.98
 694.34695.861.5259.500.011.352.580.020.030.0010.003222.07
 715.29749.7034.4113.980.040.320.270.020.070.0020.00271.00
 757.21758.711.5013.900.040.120.040.040.060.0090.00155.53
 796.24797.741.50105.400.020.020.640.030.270.0020.001235.91
 856.01857.491.480.300.010.010.000.010.150.0010.00160.21
 881.55883.081.532.600.170.010.000.050.040.0820.00156.74
 958.15965.777.623.450.100.030.020.120.030.0110.00144.16
 1029.231032.222.9912.400.240.330.140.070.070.0470.00298.43

 Table 2 Continued

Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DPC-100.0034.7534.752.630.010.010.020.000.090.0010.00160.92
 139.93144.454.521.000.010.990.070.010.030.0010.00465.79
 157.90163.835.932.760.021.010.420.010.030.0020.00481.48
 193.65199.635.984.180.011.150.920.000.170.0010.004185.50
 229.75231.231.483.000.010.850.400.000.130.0010.004134.22
 235.75238.672.922.510.010.540.200.010.040.0010.00260.28
 253.77271.6517.8830.310.042.221.190.010.160.0090.009268.41
 276.25277.731.481.000.010.360.080.010.060.0010.00155.16
 286.77323.1436.373.230.010.690.070.010.020.0020.00253.75
 332.35333.881.5310.000.061.130.200.020.030.0050.00391.96
 377.08378.551.4714.000.011.250.560.010.010.0270.005103.70
 389.02390.321.3011.000.120.960.100.020.050.0040.00197.08
 404.81406.271.461.000.260.370.070.010.010.0040.00148.42
 410.40413.403.004.500.020.660.130.010.030.0010.00357.50
 422.40425.423.022.990.120.180.040.020.030.0010.00140.02
 431.40437.406.0013.030.330.030.100.010.050.0050.00177.23
 456.90461.384.483.990.030.280.050.010.120.0010.00192.25
 482.42488.405.982.050.100.790.010.020.020.0030.00160.42
 495.90497.421.521.000.040.020.010.010.110.0010.00171.17
 512.50516.954.451.410.030.230.020.020.100.0030.00175.59
 532.05533.551.5014.000.150.020.040.040.060.0040.00168.36
 541.05542.581.533.000.330.090.050.050.030.0110.00162.34
 547.10556.088.983.360.610.160.050.020.020.0200.00177.12
 560.54562.031.4914.000.220.010.030.020.040.0010.00156.98
 574.02578.464.4412.400.020.120.180.010.060.0010.00163.06
 588.76590.341.586.900.060.040.010.060.050.0010.00150.09
 594.83596.341.5119.600.370.020.300.020.060.0070.00199.89
 624.90629.404.504.940.060.990.030.030.030.0120.00282.89
 692.43699.907.474.260.021.010.110.020.060.0010.00595.34
 734.47737.422.954.560.060.080.010.060.050.0150.00153.99
 797.45802.094.640.700.520.010.010.070.020.0260.00166.94
 838.17839.651.4821.700.040.460.050.020.030.0110.00272.50
 851.70853.201.509.200.010.010.010.070.060.0010.00151.74
 856.15859.203.0529.030.060.160.060.150.100.0160.001125.80
 899.85901.351.501.500.230.110.020.070.020.0390.00152.62
 940.44943.453.011.201.290.160.000.050.020.0190.001133.49
 958.53964.536.001.980.050.010.000.130.050.0590.00160.31
 1050.381053.383.001.850.070.090.000.130.030.0230.00149.72

 Table 2 Continued

Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DPC-0877.4380.302.8715.340.443.510.770.170.000.0360.010281.64
 149.20152.233.039.070.032.140.610.010.000.0010.009140.31
 161.28162.751.474.000.011.060.310.020.010.0010.00773.31
 201.83203.301.473.000.020.990.140.030.010.0020.00667.16
 218.31222.824.514.940.150.980.130.010.010.0040.00676.18
 237.84242.404.566.400.012.270.330.020.000.0010.011134.34
 284.32285.821.5012.000.031.970.250.040.000.0100.014127.83
 386.23387.701.478.000.011.950.280.010.010.0010.010117.45
 443.40452.429.025.550.291.150.130.050.060.0070.006125.58
 508.00509.541.543.000.010.830.150.000.010.0010.00353.06
 592.05593.501.457.000.032.020.030.020.010.0010.009116.41
 638.60641.582.983.550.010.800.070.010.030.0010.00360.17
 730.02731.451.432.000.011.020.050.000.000.0010.00356.24
 737.36738.881.5215.000.022.500.050.050.010.0010.016150.28
DPC-0733.6236.803.1828.060.010.010.150.160.010.0010.00154.20
 187.39188.901.510.300.011.030.020.010.010.0010.00157.35
 262.79264.301.5111.000.020.750.420.050.060.0010.00191.48
 288.39289.921.535.000.061.690.460.010.160.0010.008172.11
 427.32430.383.0638.470.010.010.010.010.020.0010.00150.19
 468.06469.541.4837.000.140.750.020.080.080.0750.003142.91
 587.12590.123.0059.080.371.800.140.190.200.0060.001286.53
 632.30635.303.0013.510.020.040.040.060.060.0060.00150.17
 645.77648.783.016.260.290.040.020.030.030.0010.00148.54
 681.95686.464.5110.410.032.510.090.020.040.0040.001158.27
 712.03733.0120.988.600.040.100.020.040.040.0300.00146.15
Incl.725.61728.522.9120.800.170.080.020.090.090.1480.001115.07
 768.86771.903.049.730.050.010.050.040.050.0760.00154.96
DPC-0669.2975.195.9006.440.0061.2250.3010.0080.0040.0020.00576.99
 133.55139.586.03050.310.0093.4431.4110.0200.0150.0150.015269.26
 145.58147.101.52041.000.0107.1801.4200.0180.0250.0010.034435.41
 156.01172.4416.4304.660.0082.1570.1550.0040.0120.0010.008117.33
 187.39188.871.4802.000.0900.9880.0210.0180.0120.0010.00364.86
 215.92223.387.4609.370.0222.1110.3150.0200.0110.0080.009129.04
 244.32245.831.5104.000.0100.9680.1360.0090.0170.0010.00565.17
 248.95253.364.4104.100.0080.9113.3680.0070.2270.9600.005459.30
 465.24466.701.46012.000.0400.7360.2720.0110.0060.0150.00365.46
 490.70492.231.5301.000.0801.4100.0110.0110.0030.0250.00179.57
 645.02646.521.500128.000.0100.7260.1590.0130.0910.0010.002222.75
DPC-0542.6747.134.461.660.011.610.160.000.000.0010.01388.83
 114.51118.984.470.660.010.790.010.000.000.0010.00141.53
 160.89162.391.500.500.440.080.010.010.000.0010.00146.50
 242.84244.411.571.000.150.520.080.010.000.0010.00144.69
 260.94262.391.450.500.030.810.150.000.000.0010.00149.30
 297.00298.441.441.000.010.780.140.000.000.0010.00245.48
DPC-0435.0436.531.495.000.050.030.880.010.020.0030.00547.67
 290.34293.332.993.980.011.050.120.010.010.0060.00064.61


Table 3: Significant Results, Surface Diamond Drilling, Northwest Extension, Santa Barbara Target Area as at September 20, 2022.

Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DSB-2742.3743.911.540.500.010.000.020.420.010.0010.00153.54
 130.56132.101.549.000.010.860.540.020.800.0010.003380.33
 515.37516.871.5012.000.301.040.030.060.110.0160.001143.69
 539.40546.977.575.790.050.260.000.100.120.0140.00184.24
 623.47624.961.490.500.010.960.000.010.010.0010.00152.57
 675.93677.411.4855.000.140.010.010.220.200.0300.001179.30
 749.47752.462.9912.990.040.010.000.150.120.0050.00181.74
DSB-23245.09246.571.4837.000.030.010.240.010.020.0020.00156.34
 255.34258.302.965.490.010.010.080.350.010.0010.00152.39
 264.27270.626.35152.910.020.030.130.190.010.0010.003186.67
 275.04280.975.9310.100.030.530.110.020.020.0040.02254.55
 324.71339.7715.064.910.020.530.180.050.050.0060.00464.29
 351.65353.081.4312.000.060.060.050.030.060.0060.00150.41
 357.57368.1010.535.760.040.110.010.020.090.0010.00155.11
 392.14405.7013.564.850.060.010.010.020.100.0140.00156.31
 417.81422.204.399.030.110.070.030.090.200.0050.001113.63
 429.70432.723.024.970.100.010.010.070.100.0010.00161.80
 435.76444.879.113.990.140.050.020.100.090.0130.00169.35
 561.83563.381.551.000.050.940.280.010.000.0010.02564.60
 566.48576.9210.447.570.160.070.060.010.080.0060.00661.82
 598.13631.2433.1122.280.220.310.070.120.100.0430.004122.44
 613.50625.1911.6938.190.400.120.070.220.190.0570.005195.93
 655.17676.3321.1613.290.160.070.040.120.100.0580.01297.91
Incl.668.67676.337.6622.870.320.070.050.170.150.0900.007153.20
 680.75683.732.986.500.430.050.020.070.070.0330.00188.79
 701.79703.301.5112.000.010.010.000.150.140.0040.00186.28
 713.87718.274.409.750.520.130.050.030.010.0340.00179.80
 728.73730.221.496.000.080.040.020.050.040.3680.001115.26
 733.22734.721.506.000.020.020.020.130.070.0450.00159.43
 758.94760.421.487.000.010.020.010.130.110.0470.00176.91
 766.35767.871.5227.000.040.030.010.190.160.0100.001120.01
 779.96781.461.508.000.020.290.010.150.110.0410.00193.03
 833.43834.941.514.000.050.040.010.270.080.2080.001117.51
 837.95839.511.5611.000.220.060.030.310.110.2060.001157.70
 850.05851.571.523.004.050.020.010.080.030.4600.001487.81

See Note Table 1.

Table 3 Continued

Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DSB-19115.80151.6035.804.480.030.650.270.010.010.0010.03757.93
 173.96188.8614.901.860.050.660.240.010.010.0020.01351.00
 217.37230.7513.384.330.051.320.580.010.060.0130.011128.74
 247.28263.8016.5210.560.010.470.570.010.250.0010.002202.55
 275.80287.8212.025.640.010.340.140.000.050.0010.00155.97
 343.37346.342.9712.950.180.630.190.010.010.0060.03174.71
 445.42446.901.489.000.280.040.030.010.180.0040.001142.14
 458.90464.845.941.380.010.020.010.010.090.0010.00156.01
 469.36470.851.494.000.150.090.020.080.090.0020.00182.56
 608.15609.641.4913.000.080.060.020.440.020.0990.001114.15
 665.20666.701.506.000.040.240.000.250.010.1450.00187.05
 680.17681.671.506.000.050.250.000.570.010.1400.001125.89
DSB-1865.0574.018.963.190.030.010.050.350.010.0010.00551.97
 81.52103.9722.4525.100.020.020.080.210.020.0010.00561.32
 132.54135.402.863.620.021.260.230.010.020.0010.04185.13
 154.87156.391.5212.000.010.010.010.010.100.0010.00552.77
 180.40183.382.986.490.040.050.060.020.120.0040.00465.46
 201.40202.901.505.000.020.720.100.020.030.0010.00557.99
 207.37208.871.5015.000.101.310.380.080.090.0090.010147.71
 214.89216.391.5027.000.010.010.020.020.040.0010.00548.68
 231.40232.861.4620.000.010.180.480.010.030.0010.00556.76
 243.40261.3617.9636.490.030.880.980.130.040.0020.008144.53
 268.91274.926.0114.310.040.190.170.020.090.0070.00473.14
 279.39280.851.4621.000.020.060.540.060.050.0010.00569.82
 288.36291.403.0422.940.030.080.350.030.050.0050.00564.33
 349.52351.051.5314.000.020.030.120.080.140.0140.00588.02
 357.13363.025.8918.670.040.020.100.070.130.0130.00587.58
 366.00369.073.074.560.010.010.020.010.110.0040.00551.94
 384.18385.661.485.000.010.020.010.060.120.0010.00558.95
 401.80435.6833.883.490.220.010.020.070.090.0120.00571.49
 453.25454.481.236.000.070.030.010.040.080.0070.00552.09
 510.45513.823.378.940.270.520.020.070.050.0110.01088.90
 563.27581.2417.9715.460.070.040.010.090.070.0210.00568.21
 605.26612.787.526.980.190.100.010.100.080.0580.00582.91
 618.77620.231.4610.000.480.080.010.020.010.0360.00572.28
 626.27627.751.488.000.100.020.010.070.060.0130.00553.27
 651.74662.2210.481.560.020.200.010.110.060.0510.00559.81
 713.27714.741.471.000.190.020.050.050.010.1130.00554.22
 764.28765.781.501.000.550.030.010.040.000.0610.00571.42
 779.36780.851.494.000.140.020.010.150.100.0090.00576.02
 795.89797.361.471.000.230.010.010.080.030.0240.00550.29
 851.48855.914.434.960.040.010.000.340.020.0820.00573.07
 863.50869.475.974.750.020.110.040.300.020.0250.00559.54
 881.48884.442.964.520.060.040.010.300.040.0410.00569.95

Table 3 Continued

Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DSB-1723.2026.052.8512.490.040.010.081.480.000.0010.005191.80
 68.2069.701.505.000.080.041.110.010.000.0040.00552.73
 75.6677.101.449.000.010.021.480.040.000.0120.00566.26
 80.00165.3185.3115.610.060.010.100.160.090.0020.00576.59
 177.17178.641.4733.000.080.010.210.010.030.0010.00558.07
 185.76187.261.5027.000.020.010.020.010.050.0020.00551.31
 196.18201.905.7220.090.120.050.150.040.050.0030.00562.28
 206.42207.911.4911.000.010.010.030.170.060.0010.00556.50
 228.69229.921.231.000.010.010.080.410.010.0010.00555.34
 245.00264.2519.2525.400.010.010.080.260.020.0010.00567.37
 276.48277.991.511.000.020.010.020.010.120.0010.00552.26
 289.85292.792.9443.100.030.010.030.010.030.0010.00559.64
 303.08305.952.871.510.010.010.150.000.120.0040.00556.35
 314.72316.201.481.000.010.010.030.020.210.0010.00585.85
 330.66342.4811.825.190.030.010.030.111.180.0010.005479.42
 400.49401.991.5044.000.100.020.080.360.330.0380.005235.71
 404.99406.481.4910.000.080.010.030.060.050.0380.00553.83
 421.48422.981.5011.000.040.010.020.140.120.0010.00578.33
 427.47430.533.063.990.010.010.010.010.120.0010.00552.69
 457.44469.5512.114.730.680.010.000.060.030.0070.00585.69
 537.11538.591.4825.000.020.020.010.280.250.0300.005163.38
 549.10550.601.505.000.040.010.010.080.070.0240.00551.93
 561.14562.631.4921.000.080.010.010.170.160.0220.005115.81
 579.13580.621.496.000.110.010.010.090.080.0070.00561.27
 589.74592.743.008.530.060.030.010.130.110.0490.00584.08
 603.13609.156.026.020.110.050.010.110.090.0070.00567.35
 616.82618.801.9810.000.190.080.020.040.030.0710.00564.16
 624.82642.9618.1430.610.230.020.010.140.130.0370.005127.35
Incl.639.95642.963.01106.470.510.030.010.520.470.0560.005410.38
 648.98653.344.3610.900.060.040.010.160.150.0780.005113.03
 670.36671.891.5312.000.190.020.030.100.090.0930.00597.58
 675.12676.641.525.000.090.360.020.150.080.0180.00582.47
 679.60684.174.576.300.150.080.010.110.070.0170.00568.44
 689.20690.631.431.000.550.010.010.040.030.0090.00569.79
 707.14710.183.043.990.080.020.010.130.060.0310.00559.01
 731.16734.203.041.510.030.120.030.200.010.2280.00586.82
 741.70743.291.591.000.020.060.070.050.000.2590.00569.60
 774.78776.952.171.000.030.310.020.200.010.0380.00554.56
 783.28786.403.121.000.011.860.010.010.010.0060.00599.41
 809.90812.822.921.000.010.010.010.140.010.1570.00554.12
 818.59826.167.571.840.160.010.010.220.000.1340.00572.98

 Table 3 Continued

Hole No.From (m)To (m)Length (m)AgAuZnPbCuSnBiCdAg eq
g/tg/t%%%%%%g/t
DSB-160.003.753.7556.000.020.010.010.010.000.0010.00560.83
 128.55134.525.976.520.030.540.140.040.050.0010.00563.66
 152.50156.984.485.300.010.720.040.010.020.0010.00550.56
 179.45180.981.531.000.010.090.010.030.140.0010.00565.47
 188.42191.433.0115.260.070.820.050.230.080.0020.005123.03
 201.94203.441.508.000.011.170.020.020.030.0010.00580.81
 218.47231.9613.498.950.020.740.080.010.030.0010.00663.04
 251.38252.931.557.000.010.860.020.010.010.0030.00557.65
 290.40291.921.5210.000.020.030.010.090.090.0060.00559.68
 293.44294.941.5017.000.190.070.030.020.030.0080.00553.88
 339.95341.431.489.000.060.060.040.100.100.0150.00574.13
 366.90374.317.416.810.060.390.040.020.030.0090.00547.90
 462.67468.706.0315.130.060.520.010.120.110.0560.005113.45
 476.26477.751.493.000.820.110.010.060.040.0490.005114.02
 501.73506.144.415.040.120.120.020.050.050.0640.00560.71
 584.20585.751.5515.000.230.100.020.100.130.0010.005103.21
 603.17604.731.5611.000.030.020.010.080.080.0040.00557.35
 639.80644.404.6020.640.040.010.010.150.130.0060.00596.41
 718.08721.083.0010.490.010.010.010.190.040.0060.00552.70
 746.10747.601.501.000.290.350.010.030.010.0040.00552.21

 Table 4: Summary of Diamond Drill Holes Completed with Assays Pending and Drill Holes in Progress at Iska Iska from September 20, 2022 press release.

SUMMARY DIAMOND DRILLING ISKA ISKA
Hole No.TypeCollar
Easting		Collar
Northing		ElevAzimuthAngleHole Length
(m)
Surface Drilling Santa Barbara Resource Definition South-Southeast Extension
DSB-31S205652.47656108.44088.0225°-60°1055.6
DSB-33S205259.47655997.84262.7225°-60°869.4
DSB-34S205088.47656105.54339.1225°-60°851.4
DSB-35S205274.07655896.14224.5225°-60°1061.4
DSB-36S205016.07656179.14360.0225°-60°935.4
DSB-37S205729.97656034.64054.8225°-60°917.4
DSB-38S205588.07655893.04087.0225°-60°851.5
DSB-39S205823.17655981.94035.0225°-60°857.4
DSB-40S205684.37655839.54062.3225°-60°1052.4
DSB-41S205540.37655695.54092.7225°-60°842.4
DSB-42S205653.07656253.04125.0225°-60°845.4
DSB-43S205277.07656316.04156.3225°-65°833.1
 Subtotal10,972.8
DSB-44S205157.07656038.04301.0225°-55°In progress
        
Santa Barbara Geotechnical Drill Holes
DHK-26S205700.37656454.44180.0225°-65°In progress
DHK-27S205529.47656222.54153.1270°-45°In progress
DHK-28S205597.37656479.64151.4225°-65°In progress
DHK-29S205485.77656489.54158.0225°-70°In progress
        
Santa Barbara Underground Metallurgical Hole
METSBUG-03UG205284.57656080.04167.1270°-35°707.8
 Subtotal707.8
Mina 2 Target Area - Surface Drill Program Testing Magnetic Inverse Model
DM2-01S20594476542113674.030°-60°860.3
      Subtotal860.3
      TOTAL12,540.9

S = Surface UG=Underground; collar coordinates in metres; azimuth and dip in degrees. Total drilling completed since the start of the program on September 20, 2020 is 74,782m in 113 drill holes (32 underground drill holes and 82 surface drill holes) including 5 holes in progress.

Qualified Person

Dr. Osvaldo Arce, P.Geo., General Manager of Eloro's Bolivian subsidiary, Minera Tupiza S.R.L., and a Qualified Person in the context of NI 43-101, has reviewed and approved the technical content of this news release. Dr. Bill Pearson, P.Geo., Executive Vice President Exploration Eloro, and who has more than 45 years of worldwide mining exploration experience, including extensive work in South America, manages the overall technical program, working closely with Dr. Osvaldo Arce, P.Geo. Dr. Quinton Hennigh, P.Geo., Senior Technical Advisor to Eloro and Independent Technical Advisor, Mr. Charley Murahwi P.Geo., FAusIMM of Micon are regularly consulted on technical aspects of the project.

Eloro is utilizing both ALS and AHK for drill core analysis, both of whom are major international accredited laboratories. Drill samples sent to ALS are prepared in both ALS Bolivia Ltda's preparation facility in Oruro, Bolivia and the preparation facility operated by AHK in Tupiza with pulps sent to the main ALS Global laboratory in Lima for analysis. More recently Eloro has had ALS send pulps to their laboratory at Galway in Ireland. Eloro employs an industry standard QA/QC program with standards, blanks and duplicates inserted into each batch of samples analyzed with selected check samples sent to a separate accredited laboratory.

Drill core samples sent to AHK Laboratories are prepared in a preparation facility installed and managed by AHK in Tupiza with pulps sent to the AHK laboratory in Lima, Peru. Au and Sn analysis on these samples is done by ALS Bolivia Ltda in Lima. Check samples between ALS and AHK are regularly done as a QA/QC check. AHK is following the same analytical protocols used as with ALS and with the same QA/QC protocols. Turnaround time continues to improve, as laboratories return to more normal staffing levels.

About Iska Iska

Iska Iska silver-tin polymetallic project is a road accessible, royalty-free property, wholly controlled by the Title Holder, Empresa Minera Villegas S.R.L. and is located 48 km north of Tupiza city, in the Sud Chichas Province of the Department of Potosi in southern Bolivia. Eloro has an option to earn a 99% interest in Iska Iska.

Iska Iska is a major silver-tin polymetallic porphyry-epithermal complex associated with a Miocene possibly collapsed/resurgent caldera, emplaced on Ordovician age rocks with major breccia pipes, dacitic domes and hydrothermal breccias. The caldera is 1.6km by 1.8km in dimension with a vertical extent of at least 1km. Mineralization age is similar to Cerro Rico de Potosí and other major deposits such as San Vicente, Chorolque, Tasna and Tatasi located in the same geological trend.

Eloro began underground diamond drilling from the Huayra Kasa underground workings at Iska Iska on September 13, 2020. On November 18, 2020, Eloro announced the discovery of a significant breccia pipe with extensive silver polymetallic mineralization just east of the Huayra Kasa underground workings and a high-grade gold-bismuth zone in the underground workings. On November 24, 2020, Eloro announced the discovery of the SBBP approximately 150m southwest of the Huayra Kasa underground workings.

Subsequently, on January 26, 2021, Eloro announced significant results from the first drilling at the SBBP including the discovery hole DHK-15 which returned 129.60 g Ag eq/t over 257.5m (29.53 g Ag/t, 0.078 g Au/t, 1.45%Zn, 0.59%Pb, 0.080%Cu, 0.056%Sn, 0.0022%In and 0.0064% Bi from 0.0m to 257.5m. Subsequent drilling has confirmed significant values of Ag-Sn polymetallic mineralization in the SBBP and the adjacent CBP. A substantive mineralized envelope which is open along strike and down-dip extends around both major breccia pipes. Continuous channel sampling of the Santa Barbara adit located to the east of SBBP returned 442 g Ag eq/t (164.96 g Ag/t, 0.46%Sn, 3.46% Pb and 0.14% Cu) over 166m including 1,092 g Ag eq/t (446 g Ag/t, 9.03% Pb and 1.16% Sn) over 56.19m. The west end of the adit intersects the end of the SBBP.

Since the initial discovery hole, Eloro has released a number of significant drill results in the SBBP and the surrounding mineralized envelope which along with geophysical data has defined a target zone 1400m along strike, 500m wide and that extends to a depth of 600m. This zone is open along strike to the northwest and southeast as well as to the southwest. The Company's nearer term objective is to outline a maiden NI 43-101 compliant mineral resource within this large target area. As outlined in this press release as a result of continuing discoveries from recent drilling that have substantially extended the high-grade feeder zone at Santa Barbara, the Company has pushed back the inaugural mineral resource to the end of Q1 2023.

About Eloro Resources Ltd.

Eloro is an exploration and mine development company with a portfolio of gold and base-metal properties in Bolivia, Peru and Quebec. Eloro has an option to acquire a 99% interest in the highly prospective Iska Iska Property, which can be classified as a polymetallic epithermal-porphyry complex, a significant mineral deposit type in the Potosi Department, in southern Bolivia. A recent NI 43-101 Technical Report on Iska Iska, which was completed by Micon International Limited, is available on Eloro's website and under its filings on SEDAR. Iska Iska is a road-accessible, royalty-free property. Eloro also owns an 82% interest in the La Victoria Gold/Silver Project, located in the North-Central Mineral Belt of Peru some 50 km south of Barrick's Lagunas Norte Gold Mine and Pan American Silver's La Arena Gold Mine. La Victoria consists of eight mining concessions and eight mining claims encompassing approximately 89 square kilometres. La Victoria has good infrastructure with access to road, water and electricity and is located at an altitude that ranges from 3,150m to 4,400m above sea level.

For further information please contact either Thomas G. Larsen, Chairman and CEO or Jorge Estepa, Vice-President at (416) 868-9168.

Information in this news release may contain forward-looking information. Statements containing forward-looking information express, as at the date of this news release, the Company's plans, estimates, forecasts, projections, expectations, or beliefs as to future events or results and are believed to be reasonable based on information currently available to the Company. There can be no assurance that forward-looking statements will prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements. Readers should not place undue reliance on forward-looking information.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.



These press releases may also interest you

at 11:00
Navistar Provides Peace of Mind with New Ownership Solutions for Electric Vehicle Line-Up
Designed to make the transition to battery-electric vehicles (BEVs) as seamless as possible for customers, Navistar, Inc. (Navistar) introduces a suite of comprehensive ownership solutions for its entire line of BEVs at the Advanced Clean...

at 09:45
Odyssey Marine Exploration Reports Full Year 2023 and First Quarter 2024 Results and Provides Company Update
Odyssey Marine Exploration, Inc. , a global subsea mineral exploration and validation company, filed a Comprehensive Form 10-K for the year ended December 31, 2023, which included restated financial statements for the year ended December 31, 2022,...

at 09:10
Covia Completes Acquisition of Silica Sand Mining Operation, Expands Offering
Covia, a leading provider of mineral-based and material solutions for a range of Industrial markets, today announced that it has completed the previously announced acquisition of R.W. Sidley's Industrial Minerals Division, which provides...

at 09:10
Hecla Releases 2023 Sustainability Report
Hecla Mining Company has released its 2023 Sustainability Report, highlighting the Company's environmental, social and governance (ESG) performance. "Hecla demonstrated resilience in 2023 as we faced operational disruptions due to wildfires in...

at 08:30
Lear Corporation Announces Two Key Leadership Changes
Lear Corporation , a global automotive technology leader in Seating and E-Systems, effective May 16, made two key changes to its leadership team as it drives toward an Innovative, Digital, Engineered and Automated (IDEA) future....

at 08:15
PHX Minerals Declares Regular Dividend of $0.03 Per Share
PHX Minerals Inc., , today announced that its Board of Directors has declared a quarterly dividend of $0.03 per share on the company's common stock. The dividend is payable on June 11, 2024, to shareholders of record on May 31, 2024.  About PHX...

More news about Mining industry...


News published on and distributed by: