Le Lézard
Classified in: Mining industry
Subject: NEW PRODUCTS/SERVICES

Liberty Gold Reports Weighted Average 86.9% Gold Extraction from Metallurgical Column Leach Testing on Rangefront Zone Oxide Gold Mineralization, Black Pine Project, Idaho


VANCOUVER, British Columbia, March 22, 2023 (GLOBE NEWSWIRE) -- Liberty Gold Corp. (TSX: LGD; OTCQX: LGDTF) ("Liberty Gold" or the "Company") is pleased to report results from Phase 4A metallurgical testing of oxide material from the Rangefront Zone at its Black Pine Oxide Gold Project ("Black Pine") in southeastern Idaho. 

HIGHLIGHTS

______________________
1
Weighted average gold extraction is obtained using the following equation: (composite head grade (grams/tonnes) multiplied by extraction (%) for all head grades)/sum of all head grades.  Using arithmetic averages tends to over-represent low grade composites and under-represent high grade composites.  The arithmetic extraction average of the 24 column tests is 76%.

2 See press release dated February 7, 2023 and the technical report entitled "Technical Report on the Updated Mineral Resource Estimate at the Black Pine Gold Project, Cassia and Oneida Counties, Idaho, USA", effective January 21, 2023, and signed March 10, 2023, co-authored by Ryan Rodney, CPG, and Gary L. Simmons, MMSA, both independent Qualified Persons under NI 43-101; and Moira Smith, Ph.D., P.Geo. of Liberty Gold Corp, available on SEDAR.com.

Jon Gilligan, Chief Operating Officer for Liberty Gold said, "Data from the extensive metallurgical test work completed at Black Pine continue to indicate rapid leaching and relatively high gold extractions from these oxide ores. With these results, the Rangefront Zone is now the highest-recovery oxide material we have found at Black Pine. Recovery continues to be relatively insensitive to particle size and there is a predictable grade-recovery relationship, both of which support run of mine heap leaching as the preferred processing route. The quality and quantity of metallurgical information today equals or exceeds pre-feasibility level requirements, significantly de-risking the project."

BLACK PINE METALLURGICAL TEST WORK

Liberty Gold has completed multiple phases of metallurgical testing at Black Pine including:

______________________
3
Previously referred to as "Phase 1" ? see press release dated June 16, 2020
4 Previously referred to as "Phase 2" ? see press release dated August 18, 2020
5 Previously referred to as "Phase 3" ? see press release dated October 27, 2021
6 Previously referred to as "Phase 4" ? see press release dated October 27, 2021

Results generated by the Liberty Gold metallurgical program are consistent with historical column test results from three surface bulk samples and five drill core samples generated by Noranda in 1988 prior to mining, which returned 80.8% weighted average gold extraction.

The deposit-wide gold extraction is represented through the aggregate test data illustrated in Figure 1 below. This graphic illustrates the gold grade to gold extraction relationship for all column tests conducted to date at Black Pine and clearly demonstrates a) the improved metallurgical response from the Rangefront Zone materials relative to the other samples and b) the Phase 3 low-grade samples performing consistently with the grade-extraction trend for Black Pine material overall.

For a graph of results of the Liberty gold grade-gold extraction results for all column test work to date, see Figure 1 or click here:

https://libertygold.ca/images/news/2023/March/Figure1BlackPineGoldGradeGoldExtractionResults03222023.pdf

Figure 1: Black Pine Gold Grade-Gold Extraction Results


*Data from several columns of Transitional Material are included in the above graph.

Two additional phases of metallurgical testwork are currently in progress, comprising:

Results from these two phases of testing will be completed in the second half of 2023.

Internal clay content and rock quality models indicate that a small portion of the Black Pine Resource may require in-pit or top-of heap blending, eliminating the need for a crush/agglomeration flowsheet component, and supporting simple ROM heap leaching at Black Pine.

Metallurgical test work completed on Black Pine to date equals or exceeds pre-feasibility requirements, with oxide ROM heap leach recoveries characterised currently by 16 different grade-recovery relationships. It is anticipated that one further phase of testwork beyond that currently in progress is required to meet feasibility standards on current resources.

All metallurgical work at Black Pine has been supervised by Gary Simmons MMSA, formerly the Director of Metallurgy and Technology for Newmont Mining Corp. Mr. Simmons has managed or supervised many metallurgical testing programs on similar Carlin-style sedimentary rock-hosted oxide gold deposits throughout the Great Basin.

PHASE 4A TEST RESULTS

For a table of results of the Black Pine Phase 4A variability composite test results, see Table 1 or click here:

https://libertygold.ca/images/news/2023/March/Table1BlackPinePhase4AVariabilityCompositeTestResults03222023.pdf 

Table 1: Results, Black Pine Phase 4A Variability Composite Testing

Black Pine Phase 4A - Rangefront Variability Composite Testing
Phase 4A Rangefront Variability CompositesFine Bottle RollCoarse Bottle RollColumn Tests
Feed Target P80 (75µm)Feed Target P80 (1,700µm)
Direct LeachCIL LeachDirect LeachCIL Leach
Composite IDRock FormationFeed P80 (µm)Calc Hd Au (ppm)Gold Extracted (%)Feed P80 (µm)Calc Hd Au (ppm)Gold Extracted (%)Feed P80 (µm)Calc Hd Au (ppm)Gold Extracted (%)Feed P80 (µm)Calc Hd Au (ppm)Gold Extracted (%)Feed P80 (mm)Calc Hd Au (ppm)Gold Extracted (%)
BP533-90RF-Pola540.26082.7540.26495.81,4600.24685.01,2600.25291.724.20.23990.8
BP533-91RF-Pola360.82579.5540.79888.31,5800.80480.51,5700.82383.423.30.78286.7
B511CA-92RF-Ppos710.37975.2690.36882.61,4300.37070.01,3500.39071.811.30.36880.4
B511CA-93RF-Ppos640.17371.1690.17290.71,5600.14767.31,4300.17080.625.20.15082.7
B511CA-94RF-Ppos720.14269.7700.23693.21,4500.20274.81,6000.14075.024.00.13779.6
B511CA-95RF-Pola840.22378.0770.14685.61,5200.18375.41,4600.21788.024.30.20988.5
B511CA-96RF-Pola871.36086.8841.25093.71,3701.23889.91,4001.29291.324.71.32292.4
B511CA-97RF-Pola1821.67387.71121.80295.11,3001.76892.51,4901.72993.922.41.96695.8
B511CA-98RF-Pola350.99484.4880.93091.31,4501.05486.41,3901.01287.125.00.93888.7
B511CA-99RF-Pola1900.27073.71500.25183.32,1900.26872.82,1000.26678.928.80.35284.1
BP541-100RF-Ppos650.27473.0530.26582.61,4900.29873.21,5700.27872.327.80.26178.5
BP541-101RF-Ppos640.50279.3640.50486.51,3200.52277.41,5900.49177.810.90.45981.3
BP541-102RF-Ppos730.16981.7690.16591.51,7200.14283.81,3200.15885.422.20.14891.2
BP541-103RF-Ppos790.23080.4750.24787.91,4300.23986.61,3400.23081.725.30.23989.1
BP541-104RF-Ppos830.24667.5670.23075.71,3900.26474.61,4100.22367.724.30.21470.6
BP541-105RF-Pola920.25280.21050.25287.78900.26183.51,5100.24886.712.40.22487.5
BP541-106RF-Pola640.56880.3420.59289.01,2700.62084.51,3600.57384.513.70.59788.6
BP541-107RF-Pola470.22671.7690.21682.92,5400.28980.61,2900.19774.612.50.20076.5
BP556-108RF-Ppos520.19963.3560.16771.91,6800.18562.71,1700.16060.613.50.14459.0
BP556-109RF-Pola620.31061.0650.31771.91,5000.34060.31,5200.29656.124.60.28154.1
BP556-110RF-Pola420.23680.9620.15475.31,4400.25077.21,4900.13463.424.50.12366.7
BP556-111RF-Pola811.02584.5681.02889.21,3501.07384.41,3201.03584.624.60.94886.6
BP556-112RF-Pola570.74282.6620.76489.11,3300.82286.41,3900.79085.212.30.73890.0
BP556-113RF-Pola660.26380.6570.25682.81,4400.27878.81,4000.25780.924.10.23481.6


For a graph of results of the Black Pine Phase 4A variability composite leach curves, see Figure 2 or click here:

https://libertygold.ca/images/news/2023/March/Figure2BlackPinePhase4AVariabilityCompositeLeachCurves03222023.pdf

Figure 2: Cumulative Leach Curves Confirm Rapid Leach Kinetics


For a table of results of the Black Pine Phase 4A variability composite gold extraction sensitivity to modelled crush size testing, see Table 2 or click here:

https://libertygold.ca/images/news/2023/March/Table2BlackPinePhase4AVariabilityCompositeGoldExtractionSensitivitytoCrushSize03222023.pdf 

Table 2: Results, Black Pine Phase 4A Variability Composite Gold Sensitivity to Crush Size

Black Pine Phase 4A - Rangefront Variability Composite Gold Extraction Sensitivity to Modelled Crush Size

KCA
Sample
No.
Comp IDRock
Formation
Calc Hd
Au (ppm)
 
75 µ1700 µP80
12.5 mm
P80
25 mm
P80
50 mm
P80
75 mm
P80
100 mm
P80
125 mm
P80
150 mm
P80
175 mm
P80
200 mm
P80
250 mm
 
95101 ABP533-90RF-Pola0.25295.192.590.890.289.689.389.188.988.788.688.588.3
95102 ABP533-91RF-Pola0.80687.086.085.485.284.984.884.784.784.684.584.584.4
95106 AB511CA-95RF-Pola0.19687.487.487.487.487.487.487.487.487.487.487.487.4
95107 AB511CA-96RF-Pola1.29293.192.491.991.891.691.591.591.491.491.391.391.2
95108 AB511CA-97RF-Pola1.78894.994.994.994.994.994.994.994.994.994.994.994.9
95109 AB511CA-98RF-Pola0.98690.488.988.087.787.487.287.187.086.986.986.886.7
95110 AB511CA-99RF-Pola0.28182.182.182.182.182.182.182.182.182.182.182.182.1
95114 BBP541-103RF-Pola0.23786.286.286.286.286.286.286.286.286.286.286.286.2
95115 BBP541-104RF-Pola0.23573.871.169.368.768.167.767.567.367.167.066.966.7
95116 ABP541-105RF-Pola0.24787.587.387.287.187.187.187.187.087.087.087.087.0
95117 ABP541-106RF-Pola0.59087.887.387.086.886.786.786.686.686.586.586.586.5
95118 ABP541-107RF-Pola0.22681.477.474.873.973.072.472.171.871.571.371.270.9
95120 ABP556-109RF-Pola0.30961.758.255.955.154.453.953.653.353.152.952.852.5
95121 ABP556-110RF-Pola0.17980.974.169.768.266.665.865.164.664.263.963.663.1
95122 ABP556-111RF-Pola1.02288.186.785.885.585.285.084.984.884.784.684.684.5
95123 ABP556-112RF-Pola0.77188.188.188.188.188.188.188.188.188.188.188.188.1
95124 ABP556-113RF-Pola0.25882.481.781.381.281.080.980.980.880.880.880.780.7
Weighted Average0.56988.581.079.579.078.578.278.077.877.777.677.577.3
 
95103 AB511CA-92RF-Ppos0.37579.978.076.776.375.875.675.475.275.175.074.974.8
95104 AB511CA-93RF-Ppos0.16288.684.381.680.679.779.178.778.478.277.977.877.4
95105 AB511CA-94RF-Ppos0.17189.782.177.375.673.972.972.271.771.270.970.570.0
95111 ABP541-100RF-Ppos0.27579.977.676.275.775.274.974.774.574.474.374.274.0
95112 ABP541-101RF-Ppos0.49685.081.378.978.177.276.776.476.175.975.775.675.3
95113 ABP541-102RF-Ppos0.15689.689.489.289.289.189.189.189.189.189.189.189.0
95119 ABP556-108RF-Ppos0.17163.661.359.959.458.958.658.458.358.258.058.057.8
Weighted Average0.25882.379.277.276.575.875.475.174.974.774.674.474.2


METALLURGICAL TEST PROGRAM

Samples for Phase 4A test work were obtained through drilling PQ core holes. Composites were selected through consideration of rock type, alteration and gold grade to achieve a wide range of geo-metallurgical types. Composites were assembled in Elko, Nevada by Liberty Gold staff, utilizing one-half or three-quarter sawed core, then shipped to Kappes, Cassiday and Associates in Reno, Nevada for metallurgical testing, comprising bottle rolls, column testing and geo-metallurgical characterization, including gold and silver assays, cyanide solubility, sulphur and carbon speciation, preg-robbing analysis, ICP geochemical assays, whole rock analysis, QXRD, load-permeability tests, modified SMC comminution testing, Bond Abrasion (Ai) testing and environmental chemistry.

For a map showing locations of drill holes used for metallurgical testing, see Figure 3, below, or click here: 

https://libertygold.ca/images/news/2023/March/Figure3BlackPineMetMap03222023.pdf

Figure 3: Location of Drillholes used for Black Pine Metallurgical Samples


Program details included:

QUALIFIED PERSON
Peter Shabestari, P.Geo., Vice-President Exploration, Liberty Gold, is the Company's designated Qualified Person for this news release within the meaning of National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") and has reviewed and validated that the information contained in the release is accurate.

ABOUT LIBERTY GOLD
Liberty Gold is focused on exploring for and developing open pit oxide deposits in the Great Basin of the United States, home to large-scale gold projects that are ideal for open-pit mining.  This region is one of the most prolific gold-producing regions in the world and stretches across Nevada and into Idaho and Utah.  We know the Great Basin and are driven to discover and advance big gold deposits that can be mined profitably in open-pit scenarios. 

For more information, visit libertygold.ca or contact:

Susie Bell, Manager, Investor Relations
Phone: 604-632-4677 or Toll Free 1-877-632-4677
[email protected]

QUALITY ASSURANCE ? QUALITY CONTROL
Drill composites were calculated using a cut-off of 0.10 g/t Au. Drill intersections are reported as drilled thicknesses. True widths of the mineralized intervals vary between 30% and 100% of the reported lengths due to varying drill hole orientations but are typically in the range of 50% to 90% of true width. Drill samples were assayed by ALS Limited in Reno, Nevada for gold by Fire Assay of a 30 gram (1 assay ton) charge with an AA finish, or if over 5.0 g/t Au were re-assayed and completed with a gravimetric finish. For these samples, the gravimetric data were utilized in calculating gold intersections. For any samples assaying over 0.10 parts per million an additional cyanide leach analysis is done where the sample is treated with a 0.25% NaCN solution and rolled for an hour. An aliquot of the final leach solution is then centrifuged and analyzed by Atomic Absorption Spectroscopy. QA/QC for all drill samples consists of the insertion and continual monitoring of numerous standards and blanks into the sample stream, and the collection of duplicate samples at random intervals within each batch. Selected holes are also analyzed for a 51 multi-element geochemical suite by ICP-MS. ALS Geochemistry-Reno is ISO 17025:2005 Accredited, with the Elko and Twin Falls prep lab listed on the scope of accreditation.

All statements in this press release, other than statements of historical fact, are "forward-looking information" with respect to Liberty Gold within the meaning of applicable securities laws, including statements that address potential quantity and/or grade of minerals, the potential size of the mineralized zone, the proposed timing of exploration and development plans, the expansion and future resource growth expected at Black Pine, expected capital costs at Black Pine, the potential processing routes, expected gold recoveries from the Black Pine mineralized material, the potential upgrade of inferred mineral resources to measured and indicated mineral resources, the potential for future additions to the current mineral resource estimate, the 2023 work program and the results thereof, the timing and results of any resource updates and the planned development work at Black Pine. Forward-looking information is often, but not always, identified by the use of words such as "seek", "anticipate", "plan", "continue", "planned", "expect", "project", "predict", "potential", "targeting", "intends", "believe", "potential", and similar expressions, or describes a "goal", or variation of such words and phrases or state that certain actions, events or results "may", "should", "could", "would", "might" or "will" be taken, occur or be achieved. Forward-looking information is not a guarantee of future performance and is based upon a number of estimates and assumptions of management at the date the statements are made including, among others, assumptions about future prices of gold, and other metal prices, currency exchange rates and interest rates, favourable operating conditions, political stability, obtaining governmental approvals and financing on time, obtaining renewals for existing licenses and permits and obtaining required licenses and permits, labour stability, stability in market conditions, availability of equipment, the availability of drill rigs, successful resolution of disputes and anticipated costs and expenditures. Many assumptions are based on factors and events that are not within the control of Liberty Gold and there is no assurance they will prove to be correct.

Such forward-looking information, involves known and unknown risks, which may cause the actual results to be materially different from any future results expressed or implied by such forward-looking information, including, risks related to the interpretation of results and/or the reliance on technical information provided by third parties as related to the Company's mineral property interests; changes in project parameters as plans continue to be refined; current economic conditions; future prices of commodities; possible variations in grade or recovery rates; the costs and timing of the development of new deposits; failure of equipment or processes to operate as anticipated; the failure of contracted parties to perform; the timing and success of exploration activities generally; the timing of the publication of any updated resources; delays in permitting; possible claims against the Company; labour disputes and other risks of the mining industry; delays in obtaining governmental approvals, financing or in the completion of exploration as well as those factors discussed in the Annual Information Form of the Company dated March 25, 2022 in the section entitled "Risk Factors", under Liberty Gold's SEDAR profile at www.sedar.com.

Although Liberty Gold has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking information, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate as actual results and future events could differ materially from those anticipated in such statements. Liberty Gold disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise.

Note to United States Investors Concerning Estimates of Measured, Indicated and Inferred Resources

The information in this News Release, including any information incorporated by reference, and disclosure documents of Liberty Gold that are filed with Canadian securities regulatory authorities concerning mineral properties have been prepared in accordance with the requirements of securities laws in effect in Canada, which differ from the requirements of United States securities laws.

Without limiting the foregoing, these documents use the terms "measured resources", "indicated resources", "inferred resources" and "probable mineral reserves". These terms are Canadian mining terms as defined in, and required to be disclosed in accordance with, NI 43-101, which references the guidelines set out in the Canadian Institute of Mining, Metallurgy and Petroleum (the "CIM") ? CIM Definition Standards on Mineral Resources and Reserves ("CIM Definition Standards"), adopted by the CIM Council, as amended. However, these standards differ significantly from the mineral property disclosure requirements of the United States Securities and Exchange Commission (the "SEC") in Regulation S-K Subpart 1300 (the "SEC Modernization Rules") under the United States Securities Act of 1934, as amended. The Company does not file reports with the SEC and is not required to provide disclosure on its mineral properties under the SEC Modernization Rules and will continue to provide disclosure under NI 43-101 and the CIM Definition Standards.



These press releases may also interest you

at 06:05
Calibre Mining Corp. ("Calibre" or the "Company") is pleased to announce the Company has entered into a key pre-commissioning and commissioning contract with Reliable Controls Corporation of Salt Lake City ("RCC") for the Company's Valentine Gold...

at 06:00
Stallion Uranium Corp. (the "Company" or "Stallion") is pleased to announce that it has appointed Matthew Schwab, an acclaimed exploration geologist in the Athabasca Basin, to its Board of Directors. At the same time, the Company thanks Terry Wells...

at 06:00
Young Mining Professionals ("YMP") is pleased to announce that the winners for 2024 of the YMP Peter Munk and Eira Thomas Awards for Young Male and Female Mining Professionals of the Year are Scott Berdahl and Ella Cullen. The YMP Awards, presented...

at 06:00
Gold Royalty Corp. ("Gold Royalty" or the "Company") is pleased to announce the filing of its operating and financial results for the three months and full year ended December 31, 2023. All amounts are expressed in U.S. dollars unless otherwise...

at 06:00
Greene Group Industries, Inc., ("GGI"), a leader in the development and manufacture of complex components via metal injection molding, has announced the acquisition of the assets of Holo, Inc. Holo's patented PureFormtm additive manufacturing...

at 05:43
Global leader in technology solutions OEM Gilbarco Veeder-Root (GVR) is dedicated to enhancing operational performance by delivering comprehensive end-to-end wetstock, industrial, mining, and business-to-business solutions, all tailored to meet the...



News published on and distributed by: