Le Lézard
Classified in: Mining industry
Subject: MISCELLANEOUS

MGX Minerals Announces Completion of 3,000 Metre Drill Program at Case Lake Lithium; 8,000 Metre Spring Drill Program Planned


VANCOUVER, British Columbia, Feb. 22, 2018 (GLOBE NEWSWIRE) -- MGX Minerals Inc. ("MGX" or the "Company") (CSE:XMG) (FKT:1MG) (OTCQB:MGXMF) is pleased to report that joint venture partner Power Metals Corp. ("Power Metals") has completed a 30-hole, 3,000 metre diamond drill program on the Northeast Dyke at its Case Lake Property near Cochrane, Ontario.  Drilling successfully intersected multiple course-grain pale green spodumene zones at shallow depths and over good intervals (see Figure 1). All drill core has been shipped to SGS Canada Inc. for assay.

Planning for the spring/early summer exploration program on Case Lake Property, Cochrane, Ontario is underway and will consist of:

Spring TargetsAreaMeterage
1Between Main and South Dykes3000 m
2Between Main and NE Dykes3000 m
3West side of Main Dyke2000 m
 total8000 m
   
Fall TargetsAreaMeterage
4East Dyke 2000 m
5Down Dip of Main Dyke3000 m
6domesTBA

Table 1 2018 Proposed Drilling at Case Lake

Proposed Drilling
The proposed 8000 m drilling for the spring/early summer drill program will target the new spodumene pegmatite dykes located between the Main Dyke and the South Dyke (Figure 2 ? Target 1). These new spodumene dykes were discovered at the end of the 2017 Main Dyke drill program (Power Metals press release dated Nov. 27, 2017). One of the new dykes was intersected in drill hole PWM-17-49 with 1.61 % Li2O and 143.8 ppm Ta over 3.0 m (see press release dated January 24, 2018).

The spring/early summer drill program will also target the area between the Main Dyke and the Northeast Dykes (Figure 2 - Target 2). Coarse-grained spodumene pegmatite was intersected in the 5400 m drill program on the Main and North Dykes and in the 3020 m drill program on the Northeast Dyke. The Northeast Dyke is located 900 m northeast along strike of the North and Main Dykes and is within the same tonalite dome as the North and Main Dykes. Since the Northeast, North and the Main Dykes are along the same strike and within the same dome, this indicates that they were emplaced along the same deep-seated structure. The drill program between the Main and Northeast Dykes will test the presence of the spodumene mineralization along strike.

A drill program will test spodumene mineralization identified during the mapping program on granitic outcrops west of the Main Dyke (Figure 2 - Target 3).

Additional targets will be drilled in Fall 2018 including the East Dyke, down dip extension of Main Dyke and dome targets identified during the Spring mapping program.

Proposed Mapping
Power Metals identified that the Main, North, South, East and Northeast pegmatite dykes are not hosted by the Case Batholith as previously thought, but by a single laccolith (Power Metals press release dated Nov. 6, 2017). A laccolith is a dome-shaped igneous body with a flat bottom which is an offshoot of a batholith. A laccolith looks similar to a water drop on a table. The Case Batholith is a 50 x 85 km ovoid granitic complex characterized by a gravity low. Power Metals has identified that the Batholith has multiple domes along its margins.

The domes are visible in Google Earth images as white outcrops and are topographic highs. These domes have no historic exploration work on them and they have the potential to host spodumene pegmatites similar to the Main and the Northeast Dykes. A total of nine domes have been identified on the Case Lake Property and will be mapped and sampled:

Exploration on the domes will consist of traverses along GPS grid lines within each dome to map the lithology and collect grab samples to evaluate the lithium content of the tonalite/granodiorite and pegmatite dykes. Pegmatite dykes will be stripped, trenched and power washed to expand their exposure. Spodumene pegmatite dykes will be channel sampled and assayed. Each dome will be evaluated as a potential drill target.

Case Lake
The Case Lake Property is located in Steele and Case townships, 80 km east of Cochrane, NE Ontario close to the Ontario-Quebec border. The Case Lake pegmatite swarm consists of five dykes: North, Main, South, East and Northeast Dykes. The Northeast Dyke contains very coarse-grained spodumene. MGX currently has a paid up 20% working interest in Case Lake and four other lithium hard rock properties in Ontario controlled by Power Metals as well as any additional properties acquired prior to August 2020. The Company has the right to acquire an additional 15% working interest, for a total of 35%, in Case Lake Lithium and the other lithium properties by making a one-time payment of $10M prior to August 2020. The Company holds an option to acquire 10,000,000 shares of Power Metals at $0.65 (see press release dated August 2, 2017).

Qualified Person
The technical portions of this press release were reviewed by Andris Kikauka (P. Geo.), Vice President of Exploration for MGX Minerals. Mr. Kikauka is a non-independent Qualified Person within the meaning of National Instrument 43-101 Standards.

About MGX Minerals
MGX Minerals is a diversified Canadian resource company with interests in advanced material and energy assets throughout North America. Learn more at www.mgxminerals.com.

Neither the Canadian Securities Exchange nor its Regulation Services Provider (as that term is defined in the policies of the Canadian Securities Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Statements

This press release contains forward-looking information or forward-looking statements (collectively "forward-looking information") within the meaning of applicable securities laws. Forward-looking information is typically identified by words such as: "believe", "expect", "anticipate", "intend", "estimate", "potentially" and similar expressions, or are those, which, by their nature, refer to future events. The Company cautions investors that any forward-looking information provided by the Company is not a guarantee of future results or performance, and that actual results may differ materially from those in forward-looking information as a result of various factors. The reader is referred to the Company's public filings for a more complete discussion of such risk factors and their potential effects which may be accessed through the Company's profile on SEDAR at www.sedar.com.

Figure 1 accompanying this announcement is available at: http://www.globenewswire.com/NewsRoom/AttachmentNg/35d6b268-07b9-460f-b033-decc5bcc84d4

Figure 2 accompanying this announcement is available at: http://www.globenewswire.com/NewsRoom/AttachmentNg/823ea4a6-23cb-4ebb-a636-1285947f48a6

Figure 3 accompanying this announcement is available at: http://www.globenewswire.com/NewsRoom/AttachmentNg/24b9c08f-878d-4998-b769-39fdea1e55d0


These press releases may also interest you

at 11:15
The "Global Industrial Gearbox Market - Outlook & Forecast 2023-2028" report has been added to ResearchAndMarkets.com's offering. The industrial gearbox market is expected to reach a value of $38.44 billion by 2028 from $30 billion in 2022, growing...

at 08:59
American Battery Technology Company (ABTC) , an integrated critical battery materials company that is commercializing its technologies for both primary battery minerals manufacturing and secondary minerals lithium-ion battery recycling, today...

at 08:32
XCMG Machinery (SHE:000425, "XCMG") is proud to announce its recent triumph at the 2024 German Design Awards, where it has been awarded the Excellent Communications Design in Integrated Campaigns and Advertising for its innovative "Cultural Gift"...

at 08:30
Asahi Kasei Plastics North America Inc (APNA), manufacturer of Asaclean and a leading supplier of purging compounds for the plastics industry, has announced a new partnership with renowned plastics distributor, Polysource. This exclusive distribution...

at 07:29
In a strategic move to address the growing talent shortage in the global construction equipment industry, XCMG Machinery (SHE:000425, "XCMG") has launched an extensive cross-training program for its employees from XCMG Global Business Headquarters....

at 06:30
The Actuators market is estimated at USD 67.7 billion in 2024 and is projected to reach USD 94.8 billion by 2029, at a CAGR of 7.0 % from 2024 to 2029 according to a new report by MarketsandMarketstm. The growth can be attributed to growing...



News published on and distributed by: