Le Lézard
Classified in: Mining industry
Subjects: CCA, FVT

Ryerson Provides Third Quarter 2017 Guidance and Announces Conference Call to be Held on November 8, 2017

CHICAGO, Sept. 28, 2017 /PRNewswire/ -- Ryerson Holding Corporation (NYSE: RYI), a leading value-added processor and distributor of industrial metals, today provided guidance for its third quarter ending September 30, 2017. The Company anticipates revenue in the range of $840 million to $860 million for the third quarter of 2017 compared to $875 million in the second quarter of 2017 and $735 million in the third quarter of 2016. Average selling prices in the third quarter of 2017 are expected to be consistent with the second quarter of 2017. Third quarter shipments are expected to be one to two percent lower sequentially due in part to hurricane-related impacts and SAP conversions in Canada. Both average selling prices and tons sold are expected to be higher compared to the third quarter of 2016. The Company expects third quarter 2017 net income attributable to Ryerson Holding Corporation in the range of $0 million to $2 million, which includes a range of $1 million of LIFO expense to $3 million in LIFO income. Adjusted EBITDA, excluding LIFO is expected to be in the range of $37 million to $40 million for the third quarter of 2017 when including hurricane and SAP conversion related impacts of approximately $5 million. Ryerson reported third quarter 2016 net income attributable to Ryerson Holding Corporation of $8 million and second quarter of 2017 net income attributable to Ryerson Holding Corporation of $1 million. Adjusted EBITDA, excluding LIFO was $49 million in the third quarter of 2016 and $52 million in the second quarter of 2017. A reconciliation of Adjusted EBITDA, excluding LIFO to net income attributable to Ryerson Holding Corporation is included below in this news release.

Ryerson's end markets as measured in shipments per day showed sequential quarterly growth in the construction equipment and food processing and agricultural equipment industries, and declines in the oil & gas and HVAC sectors. Ryerson experienced quarterly year-over-year growth in nearly all end markets, most notably in commercial ground transportation, oil & gas, and construction equipment sectors, while consumer durables experienced quarterly year-over-year demand declines.

Ryerson continues to see improved demand when viewed against the year ago period. According to the Metal Service Center Institute, U.S. service center volumes have increased by more than three percent through August 2017 year-to-date compared to the prior year period. However, elevated import levels, well supplied metals markets, and Section 232 driven panic buying throughout 2017 have muted pricing. The muted pricing together with higher procured metal costs resulted in margin compression through the quarter. Consequently, Ryerson anticipates gross margins, excluding LIFO expense to be lower in the third quarter than the second quarter of 2017.

Overall, third quarter industrial economic demand conditions appeared consistent with the prior quarter. Moreover, a weaker U.S. dollar and improved global pricing conditions have narrowed spreads between foreign and domestic steel pricing. Commodity prices have trended higher sequentially from the second quarter through the third quarter on balance despite continuing volatility in industrial base metal markets.  Consequently, we anticipate a better gross margin climate in the fourth quarter of 2017.

Ryerson Holding Corporation's Third Quarter 2017 Conference Call Details

Ryerson will host a conference call to discuss third quarter 2017 results on Wednesday, November 8, at 10 a.m. Eastern Time. The live online broadcast will be available on the Company's investor relations website, ir.ryerson.com. Ryerson will report earnings after the market closes on Tuesday, November 7.


Wednesday, November 8, 2017


10:00 a.m. ET / 9:00 a.m. CT


833-241-7253 (Domestic) / 647-689-4217 (International)



An online replay of the call will be posted on the investor relations website, ir.ryerson.com, and remain available for 90 days.

Ryerson is a leading value-added processor and distributor of industrial metals, with operations in the United States, Canada, Mexico, and China. Founded in 1842, Ryerson employs around 3,600 employees in approximately 100 locations. Visit Ryerson at www.ryerson.com.

Safe Harbor Provision

Certain statements made in this press release and other written or oral statements made by or on behalf of the Company constitute "forward-looking statements" within the meaning of the federal securities laws, including statements regarding our future performance, as well as management's expectations, beliefs, intentions, plans, estimates, or projections relating to the future. Such statements can be identified by the use of forward-looking terminology such as "believes," "expects," "may," "estimates," "will," "should," "plans" or "anticipates" or the negative thereof or other variations thereon or comparable terminology, or by discussions of strategy. The Company cautions that any such forward-looking statements are not guarantees of future performance and may involve significant risks and uncertainties, and that actual results may vary materially from those in the forward-looking statements as a result of various factors. Among the factors that significantly impact the metals distribution industry and our business are: the cyclicality of our business; the highly competitive, volatile, and fragmented market in which we operate; fluctuating metal prices; our substantial indebtedness and the covenants in instruments governing such indebtedness; the integration of acquired operations; regulatory and other operational risks associated with our operations located inside and outside of the United States; work stoppages; obligations under certain employee retirement benefit plans; the ownership of a majority of our equity securities by a single investor group; currency fluctuations; and consolidation in the metals producer industry. Forward-looking statements should, therefore, be considered in light of various factors, including those set forth above and those set forth under "Risk Factors" in our annual report on Form 10-K for the year ended December 31, 2016, and in our other filings with the Securities and Exchange Commission. Moreover, we caution against placing undue reliance on these statements, which speak only as of the date they were made. The Company does not undertake any obligation to publicly update or revise any forward-looking statements to reflect future events or circumstances, new information or otherwise.

Set forth below is a reconciliation of our anticipated net income attributable to Ryerson Holding Corporation to our Adjusted EBITDA and our Adjusted EBITDA, excluding LIFO expense (income).

Range of Estimates


(in millions)



Net income attributable to Ryerson Holding Corporation

$    -

$   2

Interest and other expense on debt



Provision for income taxes



Depreciation and amortization expense




$ 37

$ 39




Adjusted EBITDA

$ 40

$ 39

LIFO expense (income)



Adjusted EBITDA, excluding LIFO expense (income)

$ 37

$ 40

EBITDA represents net income before interest and other expense on debt, provision for income taxes, depreciation and amortization. Adjusted EBITDA gives further effect to, among other things, impairment charges on assets, reorganization expenses and foreign currency transaction gains and losses. We believe that the presentation of EBITDA, Adjusted EBITDA and Adjusted EBITDA, excluding LIFO expense (income), provides useful information to investors regarding our operational performance because they enhance an investor's overall understanding of our core financial performance and provide a basis of comparison of results between current, past, and future periods. We also disclose the metric Adjusted EBITDA, excluding LIFO expense (income), to provide a means of comparison among our competitors who may not use the same basis of accounting for inventories. EBITDA, Adjusted EBITDA, and Adjusted EBITDA, excluding LIFO expense (income), are three of the primary metrics management uses for planning and forecasting in future periods, including trending and analyzing the core operating performance of our business without the effect of U.S. generally accepted accounting principles, or GAAP, expenses, revenues and gains (losses) that are unrelated to the day-to-day performance of our business. We also establish compensation programs for our executive management and regional employees that are based upon the achievement of pre-established EBITDA, Adjusted EBITDA, and Adjusted EBITDA, excluding LIFO expense (income), targets. We also use EBITDA, Adjusted EBITDA, and Adjusted EBITDA, excluding LIFO expense (income), to benchmark our operating performance to that of our competitors. EBITDA, Adjusted EBITDA, and Adjusted EBITDA, excluding LIFO expense (income), do not represent, and should not be used as a substitute for, net income or cash flows from operations as determined in accordance with generally accepted accounting principles, and neither EBITDA, Adjusted EBITDA, and Adjusted EBITDA, excluding LIFO expense (income), is necessarily an indication of whether cash flow will be sufficient to fund our cash requirements. Our definitions of EBITDA, Adjusted EBITDA, and Adjusted EBITDA, excluding LIFO expense (income), may differ from that of other companies


SOURCE Ryerson Holding Corporation

These press releases may also interest you

at 16:03
Bunker Hill Mining Corp. (the "Company" or "Bunker Hill") announces that Jennifer Boyle has resigned as a director of the Company in order to pursue other opportunities.  The Board of Directors would like to thank Ms. Boyle for her contributions to...

at 16:01
Aurion Resources Ltd. ("Aurion" or the "Company") is pleased to report ongoing diamond drilling has intersected significant gold mineralization associated with a major east-west trending north dipping structure immediately north of the main...

at 14:33
Imperial Metals Corporation ("Imperial" or the "Company") reports results from RD-18-V41, the first surface diamond drill hole of a planned three hole program targeting the deep extension of the V-Zone at the Ruddock Creek Project. Highlights...

at 14:33
Winston Gold Corp. ("Winston Gold" or the "Company") announces that it has arranged a non-brokered private placement consisting of up to 40,000,000 units (the "Units") at a purchase price of $0.05 per Unit to raise gross proceeds of up to $2,000,000...

at 14:33
The Manufacturing Institute, the social impact arm of the National Association of Manufacturers (NAM), and PTC are joining forces to provide a first-of-its-kind Augmented Reality experience designed to inspire the next generation of manufacturers. As...

at 14:19
Digital marketing firm, fishbat, shares 5 tips that bolt seal manufacturers can utilize to improve the conversion rates on their websites. Many companies focus on SEO and social media copy to drive traffic to their websites. While that is definitely...

News published on 28 september 2017 at 16:47 and distributed by: